| Anzeige Nr: | #00224498 |
| Kategorie: | Marmorsteinbrechmaschinen |
| Marke: | Som-Mak |
| Produkttyp: | Zu verkaufen |
| Produktstatus: | Keiner |
| Herkunft: | Türkei |
| Ort: | / Orhangazi / Bursa |
| Garantiestatus: | 1 Yıl Garantiert |
| Verkaufsdetail: | , |
| Lieferstatus: | Auf Lager |
Our Butt Polish Marble Granite chamfering machine provides Serial Standard production. Easy to operate and maintain and Use The feature of our machine is that it chamfers from the bottom. The polished part of the marble is put on the band in a Future Way. Our Butt Polishing Machine is Fully Automatic Belt movement is electronically speed controlled. Our machine is produced in 6+2 8+2 10+2 12+2 14+2 standards according to the Granite and Marble Type. The engine part of our machine is completely free of water and is protected from water by inner and outer protective casings. Back of Abrasive The seals that protect the head bearings are heat and abrasion resistant Felt. All heads on the machine work independently of each other. If desired, the heads can be disabled according to the operation. The polishing heads come and go automatically with the entry of the stone and automatically close and go back when the stone comes out of the swishh. There are 1 caliber, 5 lower chamfers, 6 chamfers, 1 deburring and 1 dropper saw on our 12+2 machine. Our machine can process a maximum of 1500 mm with a Minimum 70/80 mm Bottom Support Jib Mechanism. Bandwidth of our machine is 450 Our machine is Front Control Panel Controlled. Lubricating Channels, Protective Panels for Abrasive Change, Shock Absorber Supported Fully Opening and Closing. According to Special Requests, Herringbone Diamond can be inserted into our machine. MODEL 12 HEADS Forehead Polishing & Engine Power 5 units of 1.5 kW Chamfer Polishing & Engine Power 4 units of 1.5 kW Chamfer Calibration & Engine Power 1 unit of 2.2 kW Crispy Burr Chamfer Engine Power 1 pcs 1.5 kW Dropper Saw & Engine Power 1 unit of 2.2 kW Top Pressure Motor Power 0.75 kW Band Reducer Motor Power 1,5 kW Total Electric Motor Power 21.00 kW min. Working Width 70mm Working Thickness 10 - 40mm Band Speed 0 - 350 cm/min Length / Width / Height 7100 x 1700 x 2100mm Required Water 32 lt/min Saw Disc Diameter Q250mm Pop-up Table Width 1400mm Pneumatic Pressure 1-3 bars Som-mak
12 Head Chamfering Machine
Makinaturkiye.com Rückgaberechtsrichtlinie
Käufe, die über Makinaturkiye.com getätigt werden, bieten ein sicheres Einkaufserlebnis, bei dem die Kundenzufriedenheit an erster Stelle steht. Der Kaufbutton erstellt anstelle einer direkten Zahlungsabwicklung ein Kaufformular, das den Verkäufer mit dem Käufer verbindet. In diesem Prozess werden Rücksendungen gemäß der Türkischen Verbraucherschutzverordnung bewertetund im Rahmen des festgelegten rechtlichen Rahmens bearbeitet.
Rückgabeprozess und -bedingungen
Rückgabefrist:
Für die Rückgabe berechtigte Produkte:
Wie erfolgt die Rückgabe eines Produkts?
Rückerstattungsprozess nach der Rückgabe:
Nicht rückgabefähige Produkte:
Rückgaberechte gemäß der türkischen Verbraucherschutzgesetzgebung
Widerrufsrecht:
Rückgabe von fehlerhaften Produkten:
Für Ihre Rückgabebeschwerden Die Plattform Makinaturkiye.com fungiert als Brücke zwischen Käufer und Verkäufer. Für detaillierte Informationen zum Rückgabeprozess oder zur Erstellung einer Anfrage können Sie den Verkäufer direkt über das Kaufformular kontaktieren.
| Land | Währung | Mindest Versandkosten | Höchst Versandkosten |
|---|