| Anzeige Nr: | #00211183 |
| Kategorie: | Flusswasser-Aufbereitungssysteme |
| Marke: | Sarot |
| Produkttyp: | Zu verkaufen |
| Produktstatus: | Keiner |
| Herkunft: | Türkei |
| Ort: | Sanayi Mahallesi / Ortahisar / Trabzon |
| Garantiestatus: | 2 Yıl Garantiert |
| Verkaufsdetail: | , |
| Lieferstatus: | Auf Lager |
Sarot Filtration
36 m3 / Hour Ultrafiltration System
TECHNICIAL SPECIFICATIONS
The facility is an automatic system with remote monitoring.
The facility has the capacity to remove 50 NTU of turbidity.
Turbidity measurement is made at the entrance and exit of the facility.
There is an automatic separator filter for keeping sand, gravel, etc.
Flow oscillations are controlled by adjusting the system flow with the electromagnetic flow meter and proportional valve located at the main entrance of the facility.
When the turbidity value measured at the entrance of the facility exceeds the determined turbidity value, the facility starts to produce clean water.
With the coagulation system connected to the pH system at the entrance of the facility, the filtration efficiency is increased by increasing the size of the unfilterable suspended solids.
When the turbidity of the inlet water of the facility is below 5 ntu (changeable), the facility sends the water to the clean water tank through the automatic bypass valve.
2 fully automatic sand and 2 carbon filters are used in the facility.
Water safety is ensured by using a turbidity meter in the outlet line.
Bacteriological contamination is prevented by ph-compensated chlorine dosage in the outlet line.
The facility carries out the filter backwashing with clean water. The supply of the necessary clean water tank belongs to the customer.36 m3 / Hour Ultrafiltration System technical Specification
TREATMENT ENTRY WATER: <50 NTU
DIMENSIONS :
FILTRATION UNIT: 7X2.40X1.8
AUTOMATION AND CHEMICAL UNIT: 5X2.4X2.8
Makinaturkiye.com Rückgaberechtsrichtlinie
Käufe, die über Makinaturkiye.com getätigt werden, bieten ein sicheres Einkaufserlebnis, bei dem die Kundenzufriedenheit an erster Stelle steht. Der Kaufbutton erstellt anstelle einer direkten Zahlungsabwicklung ein Kaufformular, das den Verkäufer mit dem Käufer verbindet. In diesem Prozess werden Rücksendungen gemäß der Türkischen Verbraucherschutzverordnung bewertetund im Rahmen des festgelegten rechtlichen Rahmens bearbeitet.
Rückgabeprozess und -bedingungen
Rückgabefrist:
Für die Rückgabe berechtigte Produkte:
Wie erfolgt die Rückgabe eines Produkts?
Rückerstattungsprozess nach der Rückgabe:
Nicht rückgabefähige Produkte:
Rückgaberechte gemäß der türkischen Verbraucherschutzgesetzgebung
Widerrufsrecht:
Rückgabe von fehlerhaften Produkten:
Für Ihre Rückgabebeschwerden Die Plattform Makinaturkiye.com fungiert als Brücke zwischen Käufer und Verkäufer. Für detaillierte Informationen zum Rückgabeprozess oder zur Erstellung einer Anfrage können Sie den Verkäufer direkt über das Kaufformular kontaktieren.
| Land | Währung | Mindest Versandkosten | Höchst Versandkosten |
|---|