1800 Ton Plastic Injection Machine
Ikarios Machine 1800T
1800 Ton Plastic Injection Machine
Drive Technology
Equipped with a high-performance servo system. The output power of the servo motor changes with the load without excessive energy loss. During pressure holding, it reduces the motor speed and energy consumption is extremely low. The motor does not operate during cooling, and energy consumption is zero. It increases injection accuracy while saving power, water, and reducing noise. A true revolution in hydraulic injection machines.
High Response
VT-V7, equipped with a high-response servo motor and internal gear pump system, reaches maximum output in just 0.05 seconds, significantly shortening the cycle time compared to traditional hydraulic injection machines and increasing production efficiency.
High Repeatability
The precision of UN-M7 is superimposed on the precision of the internal gear pump, creating a closed loop thanks to the high-precision pressure feedback device. Injection repeatability significantly increases injection stability compared to traditional hydraulic machines, and qualified mold parts can reach up to 3%.
Ikarios Machine 1800T Technical Specifications:
| DESCRIPTION | DESCRIPTION | UNIT | VT-1800V7 | ||
| CLAMPING UNIT | |||||
| Clamping Force | Clamping Force | ton | 1800 | ||
| Max. daylight | Max. daylight | mm | 3100 | ||
| Clamping Stroke | Clamping Stroke | mm | 1600 | ||
| Clearance Between Tie Bars | Clearance Between Tie Bars | mm | 1600x1480 | ||
| Min Mould Dimension | Min Mould Dimension | Mm | 1120X1036 | ||
| Mould Thickness Range | Mould Thickness Range | mm | 700-1500 | ||
| Ejector Force | Ejector Force | ton | 31.8 | ||
| Ejector stroke | Ejector stroke | mm | 400 | ||
| No. of Ejector Pins | No. of Ejector Pins | unit | 29 | ||
| System Pressure | System Pressure | MPa | 17.5 | ||
| INJECTION UNIT | |||||
| International Specification | International Specification | 16300 | |||
| Screw diameter | Screw diameter | mm | 125 | 135 | 145 |
| Theoretical Shot Volume | Theoretical Shot Volume | cm3 | 8284 | 9662 | 11146 |
| Shot Weight (PS) | Shot Weight (PS) | g | 7621 | 8889 | 10255 |
| Length/Diameter Ratio | Length/Diameter Ratio | L/D | 21.6 | 20 | 20 |
| Injection Pressure | Injection Pressure | M Pa | 197 | 169 | 146 |
| Injection Rate | Injection Rate | cm3/s | 987 | 1151 | 1328 |
| Injection Stroke | Injection Stroke | mm | 675 | ||
| Screw Speed | Screw Speed | RPm | 103 | ||
| GENERAL INFORMATION | |||||
| Major Motor | Major Motor | kW | 50+42+42 | ||
| No. of Heater Zones | No. of Heater Zones | unit | 7+1 | ||
| Heater Input Power | Heater Input Power | kW | 74 | ||
| Oil Tank Capacity | Oil Tank Capacity | L | 1600 | ||
| Net Weight | Net Weight | ton | 90 | ||
| Machine Dimension(L*W*H) | Machine Dimension(L*W*H) | M | 14.5x3.35x3 |
Brokerless Trade without Commission
All Communication Channels
Available on mobile phones
Open a Store and Post an Ad