| Advertisement No: | #00170787 |
| Category: | Electro Mechanical Pressure Test Device |
| Brand: | Microanaliz |
| Product Type: | For Sale |
| Product Status: | New |
| Origin: | Turkey |
| Location: | İvedik Organize Sanayi Mah / Yenimahalle / Ankara |
| Short Detail: | 2 Yıl Guaranteed |
| Sales Detail: | Bank Transfer |
| Delivery Status: | 45 Day |
The device body contains its electronics and control unit. Standards; ISO 7500-1, ASTM E4, DIN 51221, AFNOR A03-501. • According to ISO 7500-1 CLASS 1 / 0.5 • Flat material tensile jaws range (depends on material) • Tension test range 300 mm - 500 mm - 1000 mm • 16BIT / 24BIT (optional) / 32BIT (optional) • 1/300000 +-0.1% May vary according to the accessories that can be used. Operating Temperature • Long travel extensometer • Servo motor (Panasonic, Estun, Simens, Delta, Kolmorgen) 20 kN Electromechanical Universal Testing Device
Product Description
Allows for testing of the lifespan and strength of polymer-composite-metal etc. materials in the direction of TENSION - COMPRESSION - BENDING
with the ELECTROMECHANICAL test setup that enables experiments to be conducted.
• The device is fully controlled via PC and manufactured to read load and deformation values in a readable manner.
• The device can be programmed according to the desired type of test, test speed, sample sizes, and test conditions. These definitions
are saved to the setup for future use if desired.
• The Electromechanical Testing Device can perform many tests in accordance with standards using relevant accessories and apparatus.
• The accuracy of all load cells provided is Class 0.5 and has a load accuracy of ±%0.5 according to ISO 7500-1 standard.
• All load cells provided are suitable for tension and compression tests.
• Standards: ISO 7500-1, ASTM E4, DIN 51221, AFNOR A03-501, TS EN ISO 6892-1, TS 1398-1 EN ISO 527-1, TS EN ISO 178:2010.
• The device is servo motor driven and controlled via software through a computer.
• The movement speed range of the crosshead is between 0.001 mm/minute and 1000 mm/minute.
• These speed values can be adjusted during the test and are continuous.
• The load measurement accuracy of the device is ±0.5% (Class 0.5) in the range of 1/1 to 1/1,000 of the load cell capacity.
• The device can perform tension, compression loading, and force cycling as well as elongation cycling, and the elongation amount and load
can be read over time.
• All load cells provided are suitable for tension and compression tests.
• All accessories can be easily and quickly mounted and dismounted on the Universal Testing Device.
• The load cells can be automatically detected by the device after being installed.
• The system includes a servo driver and servo motor.
Capacity
• 1 kN / 10 kN / 20 kN / 50 kN / 100 kN / 2 kN
Loading
• Electromechanical servo motor driven.
MICROANALYSIS - TESLA Model Electromechanical Testing DeviceForce Accuracy
• According to ASTM E4 CLASS 1 / 0.5
• According to DIN 51221 CLASS 1 / 0.5
• According to AFNOR A03-501 CLASS 1 / 0.5
Jaw Dimensions
• Round material tensile jaws range (depends on material)
• Double column loading frame
• Special jaws can be manufactured according to customer requests.
Test Distance
Data Collection Speed
Positioning Accuracy Force Measurement Resolution
Displacement Accuracy
Device Dimensions (E X B X Y mm)
mm+-0.5%
• Dimensions may vary according to the accessories that can be used.
Tests Conducted Jaw Types Test Speed Range
• Tension Manual 0.001-300mm/min.
• Compression Pneumatic 0.001-500mm/min.
• Bending Hydraulic 0.02-1000mm/min.
• Load holding
• Step loading
• Hysteresis
• Low cycle fatigueWeight
Power
400 W/ 7.5 KWWeight
14-35 C
Extensometers
• Clip on extensometer
• Automatic extensometer
• Video extensometer
• Laser extensometer
Material Brands Used
• Displacement measurement devices (NOVATECHNIC-OPKON-ATECH)
• Force measurement devices (PULSE - CAS - ESIT - HBM - PCM)
• Electrical materials (Schneider - Telemechanic)
• Data, data collection (Fatek – Gefran – GMT- DELTA - SIMENS)
Available Optional Accessories
• Rope/Chain tensile jaw
• Fabric tensile jaw
• Plastic sample tensile jaw
• Pneumatic jaw
• Compression platform (Upper head spherical)
• Bending platform (3 point and 4 point bending)
• Bolt tensile test jaws
• Casting sample tensile jaws
• Fastener tensile test jaws
• Pipe tensile jaws (Curved jaw)
• Chain tensile jaws (Diamond jaw)
• High and low temperature (climatic) cabinet
-40/-50/-60/-70 C -- +350 C (applied in double column models.)
• High temperature oven (Furnace) 300 C - 1100 C (applied in double column models).
• Belt holding jaw
• Adhesive holding jaw
• Separation jaw
• Spring test jaw
• O-ring test jaw
• Drilling test jaw
• Sponge pressure apparatusMicroanalysis VTU 20 EL Technical Specifications
Makinaturkiye.com Return Policy
Purchases made through Makinaturkiye.com offer a safe shopping experience with customer satisfaction at the forefront. Instead of completing a direct payment transaction, the purchase button creates a purchase form, connecting the seller and the buyer. In this process, product returns are evaluated under the Turkish Consumer Rights Regulation and are handled within the determined legal framework.
Return Process and Conditions
Return Period:
Eligible Products for Return:
How to Return a Product:
Refund Process After Return:
Non-Returnable Products:
Return Rights Under Turkish Consumer Law
Right of Withdrawal:
Defective Product Return:
For Your Return Requests Makinaturkiye.com acts as a bridge between the buyer and the seller. To get detailed information about the return process or to create a request, you can contact the seller directly through the purchase form.
| Country | Currency | Minimum Shipping Rate | Maximum Shipping Rate |
|---|
Send Inquiry
Go to the store
All Ads
Send Message
Fast Chat
Brokerless Trade without Commission
All Communication Channels
Available on mobile phones
Open a Store and Post an Ad