3 Level Power & Free Conveyor

3 Level Power & Free Conveyor

BYM 3’’ These systems are named as such due to the proximity of the chain levels to 3''. The trolleys mounted on the chain can move on NPI 80 - 100 profiles. The unit load carrying capacity of the trolleys is 140 Kg, and the chain's breaking strength is 11000 Kg'. Since trolleys can only be connected to the middle links of the chains, intermediate distances can be determined as 6'' and its multiples. Generally, Webb type suspended conveyors, which are frequently used in various industries that require heavy-duty and do not need precise transport, hold an important place in today's technology. They are preferred conveyor systems due to their robustness, simple structure, and low maintenance requirements. The principle of operation is based on the trolleys mounted on the chains driven by the drive unit, moving along NPI profiles and carrying the suspended loads. Due to their structure, the chains are suitable for horizontal movements on the x and y axes, as well as vertical movements on the z axis. Horizontal turns are produced in different sizes and angles in pulley and roller types, while vertical turns vary in diameter and angles depending on the trolley distances. In BYM3 Systems, the chains consist of three parts made of high carbon steel manufactured by hot forging, called side link, middle link, and pin. Since the chain links are connected to each other without pins, their assembly and disassembly are quite easy. The trolleys consist of two symmetrical bodies to which carrying plates are connected and bearings are mounted on top. The bearings are special type conveyor bearings that can operate at 200 °C. The bodies are manufactured from high carbon steel using the hot forging method. The trolley bearings are lubricated through grease fittings located on the bodies. The drive units are divided into two main groups: caterpillars that provide movement on a flat rail, or angled types mounted on a turning rail. There are fixed and floating construction alternatives of different powers for caterpillar type drive groups. Similarly, angled drive groups also have different types and powers for 90° and 180° turns, both fixed and tensioned.