6 Drawer Cement Humidity System

Microanalysis Cement Humidity System

Product Description

1080 PRISM MOLD | 24 DRAWER MOLD

Fully Automatic 19.5 " TFT ALL IN ONE

Computer Controlled

Pool system humidity cabinet is a device that meets both the prism holding pools and the humidity panel.

The installation of air conditioners in the rooms, the installation of temperature sensors in the pools, the addition of resistors to heat the pool water, and the homogeneous distribution of pool water and room air bring many problems.

The Pool System Humidity Cabinet performs all these processes electronically and automatically as a single device, recording all information from the sensors as a graphical image on the computer.

The height of the unit is approximately 205 cm and the control unit is 118 cm with a depth of 315 cm. The unit has 1080 prisms and 24 molds.

The device has double doors. The device cabinet and components are made entirely of stainless steel.

There are slots spaced 6 mm apart in the drawers to place the prism.

In this case, it ensures that the prisms specified in the standard are no closer than 5 mm.

There are 6 drawers inside the device for placing the prism.

In this case, it ensures that the prisms specified in the standard are no closer than 5 mm.

There are 6 drawers inside the device for placing the prism.

Each drawer is independent to adjust samples with different properties.

There is a rested water tank inside the device.

The unit has a heating and cooling system controlled by an electronic control unit, and the temperature inside the cabinet is maintained at ± 1, 20 degrees.

There is a sprinkling system inside the unit, and the humidity level inside is at least 93%.

There is a temperature sensor in the sprinkling system tank, and the temperature information is sent to the computer by following the electronic display.

The water returned from the sprinkling is sent for reuse.

On the device, there is a sensor that measures the humidity and temperature of the room where the device is located, and an electronic display that reads these digitally and sends them to the computer.

Inside the device, there is a sensor that measures the humidity and temperature inside the cabinet, and an electronic display that reads these digitally and sends them graphically to the computer.

There is a portable drawer temperature sensor to read the drawer temperatures and send them to the computer.

With the computer, you can print the graphics that the software will record and save these graphics to memory.

The air in the device is automatically homogenized by the fan system.

Product Warranty Information

The invoice serves as the warranty certificate, and the devices have a 2-year warranty against mechanical manufacturing defects from the invoice date.

There is a 2-year free service warranty against electronic production failures.

Technical service & training support is also offered for a fee for a duration of 10 years.