800X2300x18000 Mm Diesel Tunnel Type Electrostatic Paint Oven

BOYMAK Tunnel Type Baking and Drying Ovens operate on the principle of hanging the workpiece on the oven conveyor for baking. In these types of ovens, after the workpiece is hung on the conveyor, it is baked or dried at a certain speed according to the thickness and m2 area of the piece.

BOYMAK Tunnel Type Baking and Drying Ovens are specially designed by our expert engineering team. They are manufactured in a disassembled form. Thanks to this feature, they can be easily assembled and moved to other areas if desired.

They are preferred by high-capacity businesses in the industry. Tunnel Type Baking and Drying Ovens are used in various sectors such as white goods, automotive, construction, agricultural machinery, and aluminum industry.

HEATING UNIT

BOYMAK Heating Exchangers are designed based on maximum efficiency and minimum fuel consumption. Our thermoblocks, mounted at the back of the oven, can raise the oven temperature from ambient temperature to +230 ºC. BOYMAK Heating Exchangers are made of 310 quality Stainless Steel material and are resistant up to 1000 ºC.

The smoke pipes used in the thermoblock are normalized Seamless smoke pipes. The thermoblock is placed inside the combustion chamber and is insulated with 150mm rock wool. There is an intervention cover against thermoblock failures in the combustion chamber. In the combustion chamber, there is a turbine fan that distributes heat inside the oven. The observation hole on the thermoblock allows for monitoring combustion efficiency and also takes precautions against gas and diesel blockages inside the thermoblock.

Tunnel Type baking and drying ovens are manufactured in a disassembled form by constructing them on a chassis with sandwich panels.
The inner part of the baking oven is made of 1.2mm ST 37 Galvanized material, while the outer part is made of 1.2 mm ST 37 material. The outer sheet of the oven is coated with electrostatic powder paint, increasing corrosion resistance.

The baking oven panels are insulated with 150mm insulation material as standard. The inner part of the oven panels is insulated with 50mm rock wool, and the outer part is insulated with 120mm glass wool, ensuring that heat losses in the baking oven do not exceed the ambient temperature (+ - 10) degrees. This way, our baking ovens consume less fuel and do not excessively heat the working environment. There is a radiant type fan that provides air circulation inside the baking oven, and thanks to the air channels running along the oven and the vents placed on the channels, a homogeneous heat distribution is achieved inside the oven.

In tunnel type baking ovens, there are two sliding doors at the entrance and exit. These doors are adjusted automatically or manually according to the size of the piece. This prevents unnecessary heat losses and provides savings.

Heat control is done through a thermocouple placed inside the oven. The BOYMAK Tunnel Type Baking Oven automatically signals when it reaches the desired temperature and can be adjusted from 0 - 250 °C via the digital clock on the heat control panel.