Filling Machine with Scale + Automatic Bag Sealing Machine

Technical Specifications of RYD-T125 - 50-2500gr Powder and Granule Filling Machine

General Features of RYD-T125 - 50-2500gr Powder and Granule Filling Machine

1. Designed for filling non-adhesive powder types, crystal products, granule products, etc., which you will produce up to 5000 pieces daily.
2. Our machine can fill from 50gr to 2500gr depending on the volume of the product due to its fitting into the weighing pan. Since it feeds the filling pan with a vibration system, it can easily weigh even in products with flow problems.
3. During operation, our machine does not require any air at all. Therefore, you do not need to purchase a compressor as in similar machines. You can easily operate it on the power outlet where you charge your mobile phone. The emptying lid of the weighing pan is opened by an electric motor. Since it does not require air for operation, the operating noise is lower compared to similar machines.
4. RYD-T125 semi-automatic weighed powder and granule filling machine is controlled by an intelligent microprocessor control card. With this feature, it calculates the pouring speed of the product to give stable gram weight and continues with more precision for the next filling. Thanks to this feature, our machine makes much more accurate gram weighing compared to similar machines. In a well-adjusted machine in terms of the product discharge channel, the filling accuracy will be around 1 gram even at 2.5 kg.
5. All surfaces in contact or not in contact with the product are made of 304 stainless steel. In this respect, it offers a hygienic working environment. With this feature of the machine, you will comply with hygiene standards such as GMP, FDA, etc.
6. It has a chassis made of thick profile. With this feature, you can use it on its chassis without the need for a different table. In addition, by unscrewing the clamps on the sides of the chassis, you can also use it as a desktop.
7. RYD-T125 semi-automatic weighed powder and granule filling machine emits less noise compared to similar machines. Having a special spring system prevents excessive noise levels during operation. From this perspective, we can say that it is a very suitable product for manufacturing facilities operating under apartments.
8. This machine has a very low power consumption level, consuming only 150 Watts of electricity. It is a type of machine classified in the A++ category.
9. It is a 100% domestically manufactured product. In this respect, you will have an advantage in spare parts and service access for the machine.
10. It does not get damaged during transport thanks to load cell fixing and vibration fixing screws. Our machine is put on sale in a wooden box made of 11mm thick wood. It is sent to you fully secure against impacts during transportation.
11. It has a very easy-to-use menu. With the menu, you can operate at 3 different vibration speeds. You can control the movements and production performance of the machine through the user menu.
12. RYD-T125 semi-automatic weighed powder and granule filling machine can be easily calibrated in a short time like two minutes. There is no need for a lot of technical knowledge to calibrate.
13. Developed to easily fill between 50gr - 2500gr.

Operating Style of RYD-T125 - 50-2500gr Powder and Granule Filling Machine

The operation method of the machine is as follows step by step:
 

1. The product is poured from the 25L volume product feed bunker to the weighing pan.
2. The first two or 3 fillings are made randomly to determine the necessary filling speed.
3. When it reaches the target weight, it gives a short beep, and a long beep if it exceeds or falls short.
4. After weighing is completed, it waits for you to press the pedal. It does not make a new weighing until you press the pedal.
5. When you press the pedal, it opens the product emptying lid and keeps it open until the weight on it is zero or close to zero.
6. After the lid is closed, the vibration starts again, and the machine re-weighs.
7. If the product in the product feed bunker decreases and the vibration power is too much during filling, it cannot make the working vibration speed accurate, and after filling, it adjusts it again. It tries different vibration speeds until it reaches the closest weight to the target weight.
8. If the product runs out in the product feed bunker, it continues the vibration for a certain period. If it cannot complete the weight, it stops the filling with a long beep, and does not make a new weighing until you press the pedal, empty the product in the weighing pan, and press the start button again.

Optional Features That Can Be Added to RYD-T125 - 50-2500gr Powder and Granule Filling Machine

• An additional mouth can be made for the product discharge mouth according to the size of the package you are working on.
• The height of the table can be increased by 30 cm according to the current measurement.

RYD-T125 - Powder and Granule Filling Machine - 50-2500gr - Other Details

• If you request additional (optional) features for the machine you selected, the delivery time of the machines takes place within a range of 5-20 days.
• The product shipment is packaged suitable for long-distance shipments.
• Renas Makina has an agreement with a shipping company. In this way, you can provide transportation of the product at a more favorable price. In case your company has an agreement with a shipping company, you may prefer to use that courier service.
• 1-year warranty is provided against factory defects.
• During the first start-up, be sure to start by removing the fixing screws, in cases where service is required with shipping, be sure to send with the fixing screws, damages due to this issue are repaired outside the warranty.