Heated Radiator Cleaning Machine 0.50 Hp

Combi And Radiator Cleaning Machine

0.50 HP Heated

Kam-Tek K-KP001

Product Information:

Kamtek 0.50 hp 3_4 bar Radiator Cleaning Machine
15.5 kg Weight
1500 Watt heating resistor
20 lt Tank capacity
Dimensions WxHxD: 90x35x35
Cleanable filter
Thermometer feature
Pressure Gauge Clock
The filling hole is made large for easy filling.
The return line has a practical screw cap for quick opening and closing.
A transparent filter in the suction line facilitates the control of contamination.
Pump and Motor
Special anti-corrosion treatment for cast iron pump body and adaptor
Anti-block system for impeller
Bronze Impeller
Copper Winding
Internal single-phase motor

It is a professional machine with ergonomic structure and stylish appearance.
Our machines have a feature of Water Heating System to make Cleaning Liquids more effective.
Easy to carry, connections work smoothly.
There is continuous technical support and application assistance service.
Depending on the machine feature, although usage areas vary;
In Combi and Condensing boilers (brand and model do not matter)
In Aluminum, iron and panel radiators
In Iron, copper, plastic pipes
It is used in cleaning closed system operating installations.
It is Guaranteed Against Manufacturing Defects for 2 Years
As it is 100% domestically produced, continuous spare parts supply is possible.

HOW TO CLEAN RADIATORS
The most suitable place to clean central heating radiators is bathrooms. The radiator cleaning machine is connected here by removing the towel radiator or radiator.
You can follow these steps to clean the central heating radiator:
- Remove the towel radiator or radiator
- Attach one end of the hose connected to the radiator cleaning machine to the hot water inlet valve of the removed radiator.
- Attach one end of the second hose to the radiators return valve and put the other end in the toilet for drainage.
- Use the nearest faucet in the bathroom to provide water to the installation.
- Fill the machine with water using the tap hose.
- Open all radiator valves and start draining dirty water from all radiators.
- After draining the dirty water, you can start cleaning with Kamtek Cleaning Chemicals one by one.
- After draining the dirty water from the pipes, the Kamtek Cleaning Chemical is put into the machine and transferred to the installation.
- The machine heater is set to 40 degrees and the radiators are washed with chemicals for at least 10 minutes each.
- Each radiator is circulated with Kamtek Cleaning Chemical for at least 15 minutes.
- After the Kamtek Cleaning Chemical circulates in the radiators, this substance needs to be removed from the installation.
- Clean water is filled into the machine by repeating the first step. This clean water is transferred to the system.
- Drainage is done by placing the other end in the toilet.
- After the radiators are completely cleaned, Kamtek Protection Chemical is applied to the Radiators and the process is terminated.
In an average apartment, there are about 6 central heating radiators. The duration of cleaning these radiators varies depending on the contamination status of the installation and takes about 1 to 2 hours.