| Advertisement No: | #00167417 |
| Category: | Motor Oil Production Plant |
| Brand: | Akfen |
| Model Type: | AK-MY |
| Product Type: | For Sale |
| Product Status: | New |
| Origin: | Turkey |
| Location: | İkitelli OSB Mah. / Başakşehir / İstanbul |
| Short Detail: | 2 Yıl Guaranteed |
| Sales Detail: | Guaranteed Sale Available, Bank Transfer, Supported by Kosgeb |
| Delivery Status: | 45 Day |
Motor Oil Production Facility Motor Oil Production Facility - Akfen Machinery Mineral oils consist of 3 main components: Base oil, Thickener, and Chemical Additives. The highest component found in mineral oils at a rate of 80% - 95% is the base oil. Since the part that gives the mineral oil its properties is the base oil, a preference can be made according to desire (synthetic, petroleum-derived). How Are Mineral Oils Obtained? Mineral oils, one of the products obtained by processing crude oil in refineries, are obtained by passing through special processes to obtain base oils. These oils are classified according to their densities. Mineral oils cannot be obtained directly. They are obtained by mixing additives according to the desired properties with base oils of different densities. Classification of Mineral Oils 1. Aliphatics: It is important to use quality base oil to pass the mineral oil certification standards. Since different chemical substances are used in mineral oil production, mineral oils exhibit different properties. In mineral oil production, base oils and synthetic oils that are suitable for performance and standards are preferred. Technical Specifications of Motor Oil Production Facility MODELS AK-MY 5 AK-MY 20 AK-MY 50 AK-MY 100 AK Daily processing capacity 5,000 20,000 50,000 100,000 Total processing time 8 Hours 8 Hours 8 Hours 8 Hours Required factory area 200 m2 500 m2 600 m2 800 m2 System Heating Method Hot Oil Boiler, Steam Boiler or Electric Resistance Products to be produced Automotive Oils (Diesel and Gasoline Oils) Industrial Oils (Gear Oil, Cutting Oil, Machine Oil) Raw material SN-80, SN-150, SN-300, SN-500 Base Oil And Recycling Base Oil Fuel Diesel, Fuel Oil, Gas and Electricity Operation System Loadcell Automation System or Semi-Automatic Manual System Laboratory Standard Basic Laboratory Equipment is Required for System Operation Required Manpower 1 Senior Engineer 1 Personnel 1 Senior Engineer 3 Personnel 2 Senior Engineers 5 Personnel 2 Senior Engineers 7 Personnel Delivery time 30 Workdays 35 Workdays 45 Workdays 60 Workdays Installation time 5 Workdays 10 Workdays 15 Workdays 20 Workdays Akfen Engineering carries out domestic and international turnkey projects for the installation of mineral oil facilities. Let your project take place among the successful projects of Akfen Machine, offering high quality and price guarantee turnkey projects for the installation, assembly, design, electrical installation, piping workmanship, personnel training, automation, insulation, performance tests and commissioning of the mineral oil plant for the desired capacity (In Europe, Arab Countries, Africa) in European countries. Let your project take place among the successful projects of Akfen Machine, offering quality products and affordable price guarantee. One of the raw materials obtained as a result of the refining of crude oil is mineral oils. A second refining process is carried out in order to separate the mineral oils according to their densities. After the second refining process, crude base oils such as SN80, SN150, SN 350 and SN500 are obtained. Duties of Mineral Oils Mineral oils enable the parts to move easily by reducing friction between surfaces. Mineral oils are obtained by mixing base oils of different intensities with various additives selected according to the features expected from resulting product. Industrial Oils; Heat treatment oils, Metal Processing Oils, Leather and Textile processing oils, Hydraulic oils, transmission oils, skid oils, rust-preventive and rust-solvent preparations oil, full synthetic industrial oils, etc. Automotive Oils; Lubricating oils, gear oils, roller bearing and bearing oils, transmission oils, machine oils, greases, synthetic oils, etc. Mineral Oil Production Plants and System Operation Principles; The base oil suitable for production is sent to the production mixer according to the type of mineral oil to be produced. The formulation prepared in Vijay and additive mixers is mixed under heat by being added to the base oil in the production mixer. After a certain period of time, sample products are taken for the laboratory, the mineral oil production is completed after the necessary checks are completed. Equipment to Be Found in The Mineral Oil Production Plant; Raw Material Tanks End Product Tanks Production Mixers Plant Process and Automation Procedures Stock Field Automatic or semi-automatic filling machines Circulation and pressing pumps Laboratory and testers Weighbridges and scales Our company offers turnkey solutions in the installation of mineral oil plant, mineral oil plant, installation of mineral oil factory, mineral oil production plant, installation of lubricating oil plant and installation of lubricating oil blending plant. MODELS AK-MY 5 AK-MY 20 AK-MY 50 AK-MY 100 AK Daily Processing Capacity 5,000 20,000 50,000 100,000 Total processing time 8 Hours 8 Hours 8 Hours 8 Hours Required factory field 200 m2 500 m2 600 m2 800 m2 Products to Be Produced Hot Oil Boiler, Steam Boiler or Electric Resistance Raw materials Automotive Oils (Diesel and Gasoline Oils) Industrial Oils (Gear Oil, Cutting Oil, Machine Oil) Operation System SN-80, SN-150, SN-300, SN-500 Base Oil And Recycling Base Oil Lab Diesel, Fuel Oil, Gas and Electricity Heating Type Loadcell Automation System or Semi-Automatic Manual System Heating Fuel Standard Basic Laboratory Equipments are Required for System Operation Necessary Manpower 1 Senior Engineer 1 Personnel 1 Senior Engineer 3 Personnel 2 Senior Engineer 5 Personnel 2 Senior Engineer 7 Personnel Delivery time 30 Workdays 35 Workdays 45 Workdays 60 Workdays Assembly time 5 Workdays 10 Workdays 15 Workdays 20 Workdays Machine safety systems have been audited and approved with these certificates: ISO 9001:2015
a) Paraffinic
b) Naphthenic
2. Aromatics
3. Aliphatics and Aromatics
Special arrangement will be carried out for high capacity plants
Special Arrangement will be carried out for High Capacity Plants
ISO 14001:2015
CE TRC-21-1811/01/01
Makinaturkiye.com Return Policy
Purchases made through Makinaturkiye.com offer a safe shopping experience with customer satisfaction at the forefront. Instead of completing a direct payment transaction, the purchase button creates a purchase form, connecting the seller and the buyer. In this process, product returns are evaluated under the Turkish Consumer Rights Regulation and are handled within the determined legal framework.
Return Process and Conditions
Return Period:
Eligible Products for Return:
How to Return a Product:
Refund Process After Return:
Non-Returnable Products:
Return Rights Under Turkish Consumer Law
Right of Withdrawal:
Defective Product Return:
For Your Return Requests Makinaturkiye.com acts as a bridge between the buyer and the seller. To get detailed information about the return process or to create a request, you can contact the seller directly through the purchase form.
| Country | Currency | Minimum Shipping Rate | Maximum Shipping Rate |
|---|
Send Inquiry
Go to the store
All Ads
Send Message
Fast Chat
Brokerless Trade without Commission
All Communication Channels
Available on mobile phones
Open a Store and Post an Ad