Medical Hose Machine (Corrugator) 4

Working Principles: Raw material (PP - PE) is loaded with 20 kg/hour. It automatically pulls this.

PLC screen temperature setting according to the raw material type (PP - PE) is adjusted automatically between 180 degrees - 250 degrees.

The machine settings are made for approximately 1 hour. Heating occurs.

The machine is controlled by an operator.

And the operation begins.

Automatic cutting measurements are set.

It is adjusted according to the thickness of the product you will produce. Automatic Nonstop 24 production takes place at the desired speed.

Meanwhile, air pressure, cold water pressures are adjusted. It varies according to the raw material (Min: Cools below 10 - 15 degrees. Air pressure 6 - 8 bar.

These systems are competitive so they are automatically adjusted.

Dimensions: 100 cm x 200 cm

Power: 19 KW

Coolant (Chillers) Inside

Screw Compressor (Atlaskoppo)

Diameter: 40 Extruder

Raw Material: (PE - PP)

Automatic Raw Material Pulling

PLC Screen Control

Diameter: From 10 to 25

Output products: Baby - Child - Adult - Life Support Unit Medical Hose Machine Manufacturing