Ø 4-12 Mm 2600 Mm Steel Mesh Welding Machine 1

2600 Mm Steel Mesh Welding Machine Ø 4-12 mm

MESHMATIC P SERIES HKM26P12

MESHMATIC C SERIES HKM26P12 Technical Specifications

Capacity:

Machine speed: 90 strokes per minute

Width of the panel: 2600mm

Length of the panel: 6000mm

Diameter of the cross wire: 4-12mm

Diameter of the wire: 4-12mm

Cross wire area: 50-300mm (adjustable via touch panel)

Area of the wire: 75-1mm

Machine Components

1) LENGTH FEEDING MECHANISM

2) WELDING UNIT

3) WIRE DISCHARGE

4) MESH EJECTION

5) AUTOMATION PANEL

1) It is controlled by a servo motor.

24 holders can be installed.

Length range can be adjusted from the computer.

2) It consists of lower electrode, upper electrode, and 9 transformers of 120 KVA.

The length rods coming from the feeding unit are held together by the magnet with the width rods coming from the width discharge unit and welding

the pistons compress the rod and welding is done with the energy coming from the transformer.

3) The magnetic bar from the width storage takes a certain amount of width rod and leaves it in the servo motor compartment.

The servo motor takes the rods one by one and gives them to the ejection unit.

The ejection process is done with pistons.

It throws the width rod towards the magnet.

5) Inside the panel, there are 9 pieces of 800Amper disk tri-stor welding units.

PLC and motor control systems are compatible with each other.

There is an internet output via Ethernet.