Ø 62 – 800mm Portable Line Drilling Machine
Ø 62 – 800mm Portable Line Drilling Machine
It is suitable for drilling holes and performing internal and external butt welding in the working range of 0 62 mm to 0 800 mm with the standard equipment of Supercombinata SC3 (including blind holes). It is suitable for drilling and guide pulling.
With its extra kits, it is suitable for external turning, covering vertical planes, creating washer grooves, and threading. With its additional accessories, Supercombinata can meet many different needs of our customers. Both a control panel for 230V or 110V power supply and a digital version are available.
|
Technical Specifications |
|
|---|---|
|
Drilling Rod Diameter |
: Ø 60×2200 MM |
|
Line Drilling |
: Ø 62 – 800 MM |
|
External Turning |
: Optional Kit |
|
Internal Welding |
: Ø 42 – 800 MM |
|
External Welding |
: Ø 42 – 600 MM |
|
Drilling |
: Optional Accessories |
|
Guide Pulling |
: Optional Accessories |
|
Threading |
: Extra Kit |
|
Processing Vertical Surface |
: Extra Kit |
|
Rotation Motor |
|
|---|---|
|
AC Motor |
: Single Phase |
|
Power at Nominal Speed |
: 2300 W |
|
Rod Output Torque |
: 902 NM at 55 RPM |
|
1st Speed |
: Maximum 55 RPM (420 NM) |
|
2nd Speed |
: Maximum 85 RPM (235 NM) |
|
3rd Speed |
: Maximum 240 RPM (85 NM) |
|
4th Speed |
: Maximum 375 RPM (55 NM) |
|
Feeding Motor |
|
|---|---|
|
Gear Motor |
: Direct Current |
|
Power at Nominal Speed |
: 90 W |
|
Max. Speed |
: 11 RPM |
|
Feeding System |
: Electromechanical |
|
Feeding |
: Manual / Automatic |
|
Electronic Control Panel |
|
|---|---|
|
Voltage |
: 230 V (50 Hz) |
|
Main Switch |
: Yes |
|
Emergency Switch |
: Yes |
|
Inverter Supply |
: DX/SX |
|
Inverter Rotation |
: CW/CCW |
|
Speed Regulator |
: Rotation / Feeding |
|
Electric Consumption |
: 2300 W |
|
Control Panel 110/120 V |
: Upon Request |
|
Digital Control Panel |
: Upon Request |
Brokerless Trade without Commission
All Communication Channels
Available on mobile phones
Open a Store and Post an Ad