Ø12-100 mm Cutting Drilling Guide Pull Magnetic Drill 2
BDS MAB 825
Ø12-100 mm Cutting Drilling Guide Pull Magnetic Drill
-
Provides full efficiency and flexibility in steel construction, installation, and machine work. High performance & flexibility.
1800 Watt motor, 4-speed and liquid oil bath transmission Ø 100mm hole opening and 110mm drilling depth. Ø 32mm Rail drilling, Ø 50mm Countersink opening and M30 Guide pull.
- Overheating Protection
- Magnetic Indicator
- KEYLESS Quick Change Chuck
- Permanent Internal Lubrication
- Rotating Base Option
- Electronic Speed & Torque Control
- Right / Left Motor
- Carbon Wear Control
BDS MAB 825 Technical Specifications
|
Motor Power |
Amperage |
16 |
|
Voltage, V AC |
Voltage |
230 - 110/125 |
|
Core drill cutting depth max. |
inches |
4-21/64" |
|
Drilling capacity max. Ø HSS/TCT |
inches |
3-15/16" |
|
Spiral Drill Bit |
inches |
1-1/4" |
|
Rail Drilling |
inches |
1-1/4" |
|
Countersink Opening |
inches |
1-31/32" |
|
Guide Pull |
inches |
1-31/32" |
|
Lift Height |
inches |
10-3/64" |
|
Magnet Dimensions |
mm |
110 x 220 x 54 |
|
Weight |
lbs. |
55.11 |
|
Morse Taper |
MK 3 |
|
|
Tool Holder Weldon |
Industrial chuck 32 mm Weldon 1 1/4” |
|
|
KEYLESS 19 mm Weldon 3/4“ |
||
|
Gear Range |
4 |
|
|
1st gear range |
RPM |
40 – 110 |
|
2nd gear range |
RPM |
65 - 175 |
|
3rd gear range |
RPM |
140 - 360 |
|
4th gear range |
RPM |
220 - 600 |
|
Permanent internal lubrication |
||
|
Safety clutch |
||
|
Torque control |
||
|
Electronic Speed Control |
||
|
Magnet Indicator |
||
|
Overheating protection |
||
|
Carbon Wear Control |
Brokerless Trade without Commission
All Communication Channels
Available on mobile phones
Open a Store and Post an Ad