1/4 Inch Inner Diameter Double Layer Steel Braided High Pressure Airless Paint Hose

About Polyhose PH343-04 High Pressure Airless Paint Hose

• Polyhose PH343-04 is an industrial paint hose developed for high pressure airless paint spraying systems, reinforced with double layer steel wire braid.
• The product, belonging to the PH343 Paint Spray - 2W series, can be used in paint applications requiring high pressure with a working pressure of 450 bar.
• With a 1/4 inch (6.4 mm) inner diameter, it offers a suitable size for airless paint systems requiring compact hose connections.
• It has a layered structure consisting of a polyamide inner tube, steel wire braid, and polyurethane outer coating with an outer diameter of 13.7 mm.
• The polyamide inner tube provides an advantage in paint applications requiring chemical resistance against solvents and aggressive fluids.
• The double layer steel wire braid reinforcement supports the mechanical strength of the hose under high pressure.
• The blue polyurethane outer coating helps protect the outer surface of the hose in industrial working environments.
• 6500 psi working pressure is the specified technical pressure value for continuous working conditions of the hose.
• 26000 psi (1800 bar) burst pressure is one of the technical specifications regarding the pressure resistance of the product.
• The application pressure range of 150–450 bar helps evaluate the usage conditions in high pressure airless paint spraying systems.
• A minimum bending radius of 100 mm is a measurement to be considered during the installation and orientation of the hose in the working area.
• With a weight of 336 g/m, it allows for the calculation of total weight depending on the hose length.
• The temperature range of -40°C to +100°C allows for usage evaluation considering the specified fluids and working conditions.
• The working temperature in air and water-based fluids should not exceed +70°C.
• The low permeability feature of the polyamide inner tube supports its use in suitable industrial gas applications.
• Pin pricking application is optionally offered for the outer coating of the hose.
• It can be used in fluid transmission between high pressure paint pumps and airless spraying equipment.
• Polyhose PH343-04 stands out with its 450 bar working pressure, 1/4 inch inner diameter, double layer steel wire braid, and polyamide inner tube for applications requiring chemical resistance.

General Features of Polyhose PH343-04

• PH343 Paint Spray - 2W series high pressure paint hose
• 1/4 inch inner diameter measurement
• DN 06 nominal diameter
• 6.4 mm inner diameter
• 13.7 mm outer diameter
• 450 bar working pressure
• 1800 bar burst pressure
• 150–450 bar application pressure range
• Polyamide inner tube material
• Double layer steel wire braid reinforcement
• Blue polyurethane outer coating
• Optional pin pricking outer coating application
• 100 mm minimum bending radius
• 336 grams per meter weight
• -40°C to +100°C temperature range
• Maximum +70°C temperature limit in air and water-based fluids
• Usage in high pressure airless paint systems
• Structure suitable for solvent-based paint applications
• Usage in applications requiring chemical resistance against aggressive fluids
• Low permeability polyamide inner tube
• Possibility of use in suitable industrial gas applications

Applications of Polyhose PH343-04

• High pressure airless paint spraying systems
• Industrial paint applications
• Solvent-based paint spraying processes
• Connections for high pressure paint pumps
• Feeding lines for airless paint guns
• Industrial surface painting applications
• Metal surface painting processes
• Machine and equipment painting applications
• Industrial paint application facilities
• Fluid transmission lines requiring chemical resistance
• Paint application systems using solvents
• Spraying systems requiring compact hose connections
• Industrial paint spraying equipment
• Industrial gas transmission applications meeting suitability conditions
• Hose connections for high pressure paint lines

Technical Specifications of Polyhose PH343-04

Advantages of Polyhose PH343-04

• 450 Bar Working Pressure: Offers the possibility of use in high pressure airless paint spraying systems.
• 1800 Bar Burst Pressure: This is a technical value regarding the pressure resistance of the hose and should not be considered as continuous working pressure.
• 1/4 Inch Inner Diameter: Provides an inner cross-section that can be used in paint systems requiring compact hose connections.
• Double Layer Steel Wire Braid: Supports the mechanical strength of the hose under high pressure.
• Polyamide Inner Tube: Provides an advantage in applications requiring chemical resistance against solvents and aggressive fluids.
• Blue Polyurethane Coating: Helps protect the outer surface of the hose in industrial working environments.
• 150–450 Bar Application Range: Allows for usage evaluation in paint systems under specified pressure conditions.
• 100 mm Bending Radius: Indicates the minimum measurement to be considered during the installation and orientation of the hose.
• 336 g/m Weight: Facilitates weight calculations based on hose length.
• Wide Temperature Range: Can be used under different working conditions considering the temperature limits based on fluid type.
• Low Permeability: The structure of the polyamide inner tube contributes to limiting permeability in suitable industrial gas applications.
• Optional Pin Pricking: Offers an optional pin pricking choice for the outer coating.
• Solvent-Based Paint Compatibility: Supports the transmission of suitable solvent-based paints under high pressure.
• High Pressure Pump Connection: Allows for hose connections between paint pumps and spraying equipment.
• Industrial Use: Developed for the need for high pressure hoses in professional paint applications.
• Layered Hose Structure: Combines polyamide inner tube, double layer steel braid, and polyurethane outer coating.

Polyhose PH343-04 Shipping and Delivery

• The current stock status and delivery time of the product can be learned from the seller company.
• Shipping and delivery conditions are determined before the order.
• The hose length and connection details are clarified by consulting with the seller company.
• The working pressure of the system where the hose will be used, fluid properties, temperature limits, and compatibility with connection measurements should be checked before use.