11,3mm Tezgah Tipi Plaka Kaynak Ağzı Açma Makinesi
Workbench Type Plate Welding Edge Opening Machine for Concave Plates and Holes 11.3mm
BEVELTOOLS TopEdge 230V
Main Features
-
Material: Carbon Steel, Stainless Steel
-
Max. Welding Edge Length: 11.3 mm
-
Radius: R2-R3-R4-R5-R6-R8
-
Weight: 445 kg
-
Motor: Electric
Advantages
-
TopEdge is a semi-automatic and bench type welding edge opening machine that you can use on curved plates and holes.
-
You can easily and cost-effectively create a smooth welding edge with very little effort.
-
It has a freely adjustable speed and a clamping device for worktable.
-
Two-button control holder is available for operators to work safely at all times.
-
Electro-magnets can be added to fix steel products depending on the request.
-
For use in stainless steel, the RPM of the INOX machine decreases compared to 3.0 machines.
|
GENERAL TECHNICAL DATA |
Unit |
TopEdge |
|---|---|---|
|
Quality Marking |
|
"CE approved with double hand controlled with bar" |
|
Weight |
kg |
445 kg |
|
Dimensions W x D x H |
mm |
1435 x 1100 x 1510 mm |
|
Working Height |
mm |
950 mm |
|
Table Top Height |
mm |
1280 x 780 |
|
Minimum Workpiece Size |
mm |
20 x 20 mm |
|
Maximum Workpiece Width |
mm |
780 mm // unlimited length |
|
Maximum Table Load |
kg |
100 kg |
|
Control |
|
Double hand controlled with bar |
|
Chip Reservoir |
|
Removable chip tray |
|
Tool Storage |
|
Storage area under the workbench |
|
COMPONENTS TECHNICAL DATA |
Unit |
TopEdge |
|---|---|---|
|
Number of Processing Stations |
|
1 |
|
Cutter-Head Number |
|
1 |
|
Cutter Adjustments |
|
Cutter adapter can be adjusted with increments of 0.25 mm in height |
|
Cutter Types (*) |
|
Carbide cutters for aluminum, steel, and stainless steel are available |
|
Cutters for Opening Welding Edge |
|
Available angles are 15 / 22.5 / 30 / 37.5 / 45 / 52.5 / 60 degrees |
|
Radius Cutters |
|
Available radii are 2, 3, 4, 6, and 8 mm |
|
Motor Power |
KW |
Frequency controlled 1.1 kW motor |
|
Motor Speed |
rev/min |
1800 - 6600 rev/min |
|
WORKBENCH TECHNICAL DATA |
Unit |
TopEdge |
|---|---|---|
|
Material Version |
|
EPDM Rubber; or special friction version |
|
Clamping |
DaN |
"There are Welding Clamp Holes on the workbench for non-ferrous metals. |
|
ELECTRONIC TECHNICAL DATA |
Unit |
TopEdge |
|---|---|---|
|
Voltage |
V |
400 V (3L+N+PE) |
|
Frequency |
Hz |
50 Hz |
|
Current |
A |
10 A |
|
Power |
KW |
6 KW |
|
Plug |
CEE |
CEE 400 V / 16 A (5-cable) |
