12.500-13.500 adet/saat 10'lu Bardak Su Termoform Makinesi 1
10-cavity mold machine, with a production capacity of 13,500 cups per hour, 3 different cups are produced with the same mold with volumes such as 150 ml, 200 ml and 250 ml with Bottom Height Adjustment.
General Structure:
A. Machine Length 5045 mm
B. Machine Width 1045 mm
C. Machine Height 2050 mm
Machine Process Order:
100 cm diameter. Bottom coil feeding unit
4 Pitch heating unit
Air Pressure Control and Circuit Breaker System
Plexiglass doors
PNEUMATIC Movable CORE unit
PNEUMATIC Movable SCISSOR System Forming station
Air Shaft with Top Foil Holder and Heated Tension System
Photocell System
PNEUMATIC Movable SCISSOR System Bonding station
Top Pressure Piston Reinforced Bonding Unit
SERVO Movable & Screwed Pulling Unit
Reducer Driven Connecting Rod Pusher Arm Cutting Unit
Lubrication Inlets on Column Shaft and Bearings
Top Foil Waste Winding Unit
Inside Cabin Lighting
Bottom Foil Waste Cutting Unit
Inside Cutting Conveyor
Pneumatic Valves and Pistons are FESTO -SMC -MIDMAN -PNÖMAX.
PLC System is OMRON-SIEMENS-VEICHI.
Control Screen will be with 10” COLOUR TOUCHSCREEN.
Servo and Driver Equipment (OMRON-VEICHI)
All contactors and motor protections to be used will be Siemens or Telemecanique.
Stainless steel tank for Air Balance inside the machine is standard on the machine.
7075 Aluminum and 304 & 316 L Quality stainless steel is used on the machine.
Water Cup Machine Energy Consumption:
Electricity: 15 KW/hour at first start, standard operation 7.5 KW/hour
Air: 6—8 Bar. 2.5 m³ / min
Electricity: 15 KW/hour at first start, standard operation 7.5 KW/hour
Air: 6—8 Bar. 2.5 m³ / min
Sıradaki
