3/8 Inch Inner Diameter Double Layer Steel Braided High Pressure Airless Paint Hose

About Polyhose PH343-06 High Pressure Airless Paint Hose

• Polyhose PH343-06 is a high pressure paint hose developed for use in industrial airless paint spraying systems, reinforced with double layer steel wire braid.
• The product, belonging to the Polyhose PH343 Paint Spray - 2W series, can be used in professional paint applications with a working pressure of 380 bar.
• With a 3/8 inch (9.5 mm) inner diameter, it provides a suitable connection size for fluid transmission between high pressure paint pumps and spraying equipment.
• With an outer diameter of 17.5 mm, it has a multi-layer hose structure aimed at industrial paint applications.
• The polyamide inner tube provides advantages in paint applications requiring chemical resistance against solvents and aggressive fluids.
• The double layer steel wire braid reinforcement supports the mechanical strength of the hose under high pressure.
• The blue polyurethane outer coating helps protect the outer surface of the hose in industrial working environments.
• 5500 psi working pressure is the specified technical working value for high pressure airless paint spraying systems.
• 22000 psi (1520 bar) burst pressure is one of the technical specifications regarding the pressure resistance of the hose.
• The application pressure range of 150–450 bar is considered in evaluating the usage conditions of paint spraying systems.
• A minimum bending radius of 127 mm is the measurement that must be adhered to during the installation and orientation of the hose in the working area.
• A weight value of 483 g/m helps in calculating the total weight based on the length of the hose to be used.
• The temperature range of -40°C to +100°C allows for usage evaluation considering the specified fluid and working conditions.
• The working temperature in air and water-based fluids should not exceed +70°C.
• The low permeability feature of the polyamide inner tube supports its use in suitable industrial gas applications.
• Pin pricking application is an optional feature offered for the outer coating.
• Designed to meet the chemical resistance and high pressure requirements in solvent-based paint lines.
• Polyhose PH343-06 is a standout industrial airless paint hose with a working pressure of 380 bar, double layer steel wire braid reinforcement, and polyamide inner tube.

Key Advantages of Polyhose PH343-06

• 380 Bar Working Pressure: Offers the possibility of use in high pressure airless paint spraying systems.
• 1520 Bar Burst Pressure: A technical value regarding the pressure resistance of the hose and should not be considered as continuous working pressure.
• 3/8 Inch Inner Diameter: Provides an inner cross-section that can be used in paint systems requiring higher flow needs.
• Double Layer Steel Wire Braiding: Supports the mechanical strength of the hose under high pressure.
• Polyamide Inner Tube: Provides advantages in applications requiring chemical resistance against solvents and aggressive fluids.
• Blue Polyurethane Coating: Helps protect the outer surface of the hose in industrial working environments.
• 150–450 Bar Application Range: Allows for usage evaluation in paint systems under specified application conditions.
• 127 mm Bending Radius: Indicates the minimum measurement that can be considered during the placement and installation of the hose.
• 483 g/m Weight: Facilitates weight calculations based on hose length.
• Wide Temperature Range: Can be used under different working conditions considering temperature limits based on fluid type.
• Low Permeability: The polyamide material structure contributes to limiting permeability in suitable industrial gas applications.
• Optional Pin Pricking: There is an optional pin pricking option for the outer coating.
• Solvent-Based Paint Compatibility: Supports the transmission of suitable solvent-based paints under high pressure.
• High Pressure Pump Connection: Allows for hose connection between paint pump and spraying equipment.
• Industrial Use: Developed for the need for high pressure hoses in professional paint applications.
• Layered Hose Structure: Combines polyamide inner tube, double layer steel braid, and polyurethane outer coating.

Polyhose PH343-06 Technical Specifications

General Features of Polyhose PH343-06

• High pressure paint hose from the PH343 Paint Spray - 2W series
• 3/8 inch inner diameter measurement
• DN 10 nominal diameter
• 9.5 mm inner diameter
• 17.5 mm outer diameter
• 380 bar working pressure
• 1520 bar burst pressure
• 150–450 bar application pressure range
• Polyamide inner tube material
• Double layer steel wire braid reinforcement
• Blue polyurethane outer coating
• Optional pin pricking outer coating application
• 127 mm minimum bending radius
• 483 grams per meter weight
• -40°C to +100°C temperature range
• Maximum +70°C temperature limit in air and water-based fluids
• Compatibility with high pressure airless paint systems
• Use in solvent-based paint applications
• Structure aimed at applications requiring chemical resistance against aggressive fluids
• Low permeability polyamide inner tube
• Possibility of use in suitable industrial gas applications

Applications of Polyhose PH343-06

• High pressure airless paint spraying systems
• Industrial paint applications
• Solvent-based paint spraying processes
• High pressure paint pump connections
• Airless paint gun feed lines
• Industrial surface painting applications
• Metal surface painting processes
• Machine and equipment painting applications
• Industrial paint application facilities
• Fluid transmission lines requiring chemical resistance
• Paint application systems using solvents
• Paint spraying systems requiring higher flow needs
• Industrial paint spraying equipment
• Industrial gas transmission applications meeting compatibility conditions
• Hose connections for high pressure paint lines

Polyhose PH343-06 Shipping and Delivery

• The current stock status and delivery time of the product can be learned from the seller company.
• Shipping and delivery conditions are determined before the order.
• The hose length and connection details are clarified by consulting with the seller company.
• The working pressure of the system where the hose will be used, compatibility with fluid properties, temperature limits, and connection measurements should be checked before use.