Elevator Rope Unwinding and Fabric Transfer Machine
Elevator Rope Unwinding and Fabric Transfer Machine
Kartaloğlu Machine Rope Unwinding Machine is used to prepare wet woven or knitted fabrics in the form of ropes, which come out of the dyeing machine, for the next processing by bringing the rope-shaped fabric to its open width form.
1 ROPE UNWINDING UNIT
2 pieces, rope direction sensors, metal-sensitive, electronic inductive.
1 piece, rope direction-sensitive, right-left movable, surface made of special polyamide material.
Pneumatic piston disk brake that can be adjusted according to the type of fabric and affects the unwinding quality.
1 piece with magnetic brake, helical gear motor-reducer drive, moving in the opposite direction of the detected rope direction.
Rope unwinding tube moving.
All construction used in the Unwinding Head is made of 304 quality stainless steel.
2 FABRIC ROLLING UNIT
Complete stainless steel construction.
1 piece, driven by a 3-phase AC motor.
Standardly mounted at a fixed point on the main body.
Removes the final wrinkles of the fabrics unwound in the rope unwinding unit.
3 SPIRAL UNWINDING GROUP
2 pieces, complete stainless steel, spiral unwinding cylinders.
2 pieces helical gear motor-reducers.
The contact angle with the fabric can be adjusted manually.
4 FABRIC CENTERING UNIT
2 pieces, complete stainless steel fabric guiding cylinders.
Special pneumatic equipment to ensure perfect centering.
5 FABRIC PULLING CYLINDER
Automatically adjusts the working speed according to the fabric tension based on the signal from the dancer.
6 DANCER
Ensures synchronization between input and output units.
In this system, the dancer adjustment can be easily adjusted with a pneumatic piston according to the type of fabric.
3 PASTAL SWINGING UNIT
1 piece motor-reducer driven pulling cylinder.
2 pieces electronic speed controls.
Bidirectional operation (Forward-Reverse).
The pulling cylinder is wrapped with 1st quality rubber tape.
Synchronously operates according to the command from the dancer.
