Emp Q4 Next Generation Plastering Machine

Empati Machine Emp Q4

Emp Q4 Next Generation Plastering Machine 

Standard Equipment

• Pump set – D6-3

• Gear motor (mixer) 5.50 kW

• Gear motor (mill) 0.55 kW

• Discharge hose 40 bar Ø 25 mm, 15 m, with coupling

• Air hose 12 mm 16 m, with Geka coupling

• Water hose 3/4 with valve, 7 m

• Control panel, phase sequence relay (with protection fuse)

• Spray gun (long movable fitting) Ø 25 mm, nozzle 14 mm

• Electric cable 4*6 mm2 TTR, 33 m

• Compressor, 250 l/min. 6 bar

• Water pump 0.5 HP

• Water flowmeter 150-1,500 l/h.

• Mixing shaft

• Cleaning device

• Cleaning ball 30 mm, 2 pieces

• Harb

• Tool set

• Cleaning harb

• 6 cm spatula

• Wire brush

• Utility knife

• Manual rotor disassembly tool

Application Areas



The following pumpable types of factory-made dry pre-mixed pumpable mortars

• Plaster mortars

• Injection mortars

• Reinforcement and adhesive mortars

• Self-leveling screeds

• Lime-cement mortars

• Cement mortars

• Lime mortars

• Lime-cement mortars

• Fango materials

• Insulation plasters

• Embedded mortars

• External plaster

• Surface screed

• Wall mortar

• Premix (pre-mixed box) mortar

• Insulation materials and much more...

EMP Q4 New Experience in Quality and Value

• The difference is in the details.

• The consolidated pipe casing can easily withstand heavy loads.

• Maximum stability thanks to the solid frame structure with consolidated wheel support.

• Safe transport with four holding sockets at the same height and a reliable folding mechanism.

• Parts and keys are protected within the housing's inner contour, preventing any damage.

• Greater transport safety due to the absence of protruding plugs.

• Large control box: excellent ease of maintenance and optimized dust protection.

• Improved water outlet by tilting the pump sideways, allowing complete drainage of remaining water for optimal frost protection.

• A switchable version can also be delivered as FU 230/400.

• Smooth operation thanks to small mesh and large diameter fine filters.

• Easy replacement of tap parts.

• Easily attachable mixing pipe with the help of the new mixing pipe support.

• Easy cleaning and maintenance thanks to the interchangeable rubber mixing zone.

• Safe transport with four carrying handles at the same height and a reliable folding mechanism.

• Better transport capability thanks to two additional handles on the container.

• Suitable tool box for supporting the mixing pipe cleaning unit, cleaning the shaft and/or spray gun.

• If transportation is done by crane, the air compressor is automatically secured during transport.

• The tool box on the air compressor and the optionally available splash covers protect the compressor from dirt.

• Metal cover and optionally available PVC protective foil protect the connection parts from dirt.

• Integrated fixture for rotor switch.

• Excellent maintenance friendliness due to the easy accessibility of tap parts and pressure switches.

• The protective grid material remains inside the feeding container, allowing the injection hood to be safely activated. The redesigned support allows for better adjustment of the injection hood.

• High transport safety thanks to easily accessible and reinforced lifting handles.

• Best protection and transport due to the rotating motor protection frame.

• Low exposure to dust: The optional deflector element can be mounted later to prevent air from swirling in the material feeding container.

• With a simple star arch change, a high feeding speed of up to 85 l/min can be achieved in leveling screed applications (previously only 55 liters per minute).

• Since the screws are protected from dust, the side feeding tray nut can be easily opened even after long periods of operation.

• Our prices do not include 18% VAT.