Flexible Car Exhaust Pipe / Double-Locked Flexible Metal Hose Making Machine

Principle: The machine, which includes advanced technology, will apply universal wheels and four pairs of shaping wheels to create the hose step by step. The size of the locked hose will be the same as the mold formation.
Procedure:
1. All seven pairs of wheels are transfer wheels (referring to the wheel drawings), and the first pair of wheels is positioning (referring to wheel drawing 001). They cannot be pressed too hard to prevent very fast feeding. The allowed tolerance on both sides cannot exceed 0.3 mm. The third pair is folding wheels (referring to drawing 3), and the degree of folding asymmetry will not exceed 0.3 mm. In the fourth pair of folding and shaping wheels (see wheel drawing 004), the strip will be folded and shaped at a 90° angle. The fifth pair (see drawing 5) will create a strip at a 60° angle.
2. After the strip passes through the seven pairs of wheels, wrap the strip and secure it to the shaping mold, then gradually press it into the slot with the seven pressing wheels. Run the machine slowly until the correct hose comes out.
3. The transmission wheels are adjusted before factory delivery.

Flexible Car Exhaust Pipe / Double-Locked Flexible Metal Hose Making Machine

When adjusting the four center pressing wheels, please be careful: the first pair cannot be too tight, otherwise the second will be tighter than the first, and the others will be the same.
The rotation direction of the center pressing wheels:
Flexible Car Exhaust Pipe / Double-Locked Flexible Metal Hose Making Machine

Adjustment Process:
The seven pairs of wheels (1-7) will be positioned with spacers, the upper wheel must be on the same center line as the lower wheel, do not fix them. There are spacers inside the lower wheels that have been adjusted before delivery. The spacers outside the wheels will be pressed by nuts. Different thickness spacers will be used to ensure that the lower wheel is exactly in the middle of the strip and that both edges are folded equally. Five pairs of wheels must be pressed parallel with the same force. Ensure that the strips are not damaged while pressing the wheels down.
Do not tighten the nuts on the pressing tools to allow free movement inside.
When a tight locking hose needs to be made, a gasket must be placed.
When adjusting the transmission wheels, all wheels should be loosened, then allow the wheels to fall freely down and then tighten.
Keep the distance between the large table of the machine and the pressing wheel support at 1.5 mm clockwise. (For machine 3 s, it will be 1.0 mm)
Maintenance and Repair:
Add grease to the chain wheel and chain before operation and ensure proper lubrication of the shaft and chain.
Run the machine at a constant speed, never accelerate or decelerate suddenly. While operating the machine, the speed should not be less than 400 rpm and max. speed should not exceed 800 rpm.
Cut off the power supply when the machine is not running.
Tighten the nuts on the wheels and prevent slipping, and check to ensure.

4. Company Overview

ALEMİN SAN MACHINE

We have been supplying all kinds of machines related to hoses, bellows, and fabric expansion joints for over 35 years. In the meantime, we can design and manufacture special equipment according to your specific requirements. Our machines have been exported to many countries such as Ukraine, Russia, Vietnam, India, Canada, Australia, Italy, France, the UK, and Turkey. We guarantee a cooperation relationship that provides long-term mutual benefits!

5. Application
Exhaust hose making machines are widely used to produce exhaust pipes or flexible connectors for trucks. Compared to the locked ASS hose, the triple hose has the following features:

Low leakage
Better sealing performance
Flexible
Exhaust connector, Exhaust pipe for Truck.
Industrial flexible metal hose making.
SS and sss type, round and polygon type
Number

Size

Speed/hour production

Strip size (width * thickness)

1

7 mm

200

4mm*0.22mm

2

9 mm

200

6mm*0.2mm

3

11.14mm

200

7.1 mm*0.2 mm

4

16,18,21mm

115

8.6 mm*0.2 mm

5

26,29,30mm

100

9.5 mm*0.23 mm

6

32,35mm

100

12.7 mm*0.25 mm

7

37,42mm

100

15mm*0.3mm

8

45,51,55mm

100

17mm*0.35mm

9

60,63,70,76,80mm

80

21.2 mm*0.45 mm

10

89,95,102mm

70

25mm*0.55mm

Flexible Car Exhaust Pipe / Double-Locked Flexible Metal Hose Making Machine

6. Packaging and Delivery

Flexible Car Exhaust Pipe / Double-Locked Flexible Metal Hose Making Machine

7. Customer Visit

Flexible Car Exhaust Pipe/ Double-Locked Flexible Metal Hose Making MachineFlexible Car Exhaust Pipe/ Double-Locked Flexible Metal Hose Making Machine

8. Certification
Flexible Car Exhaust Pipe / Double-Locked Flexible Metal Hose Making Machine

FAQ for locked hose making machine

Q: Why should you choose us as your supplier?
A: We are the most professional in flexible pipe making machines with over 30 years of experience.

Q: What can you supply for flexible pipe making machine?
A: Locking