Hsp 10-150 Litre/Minute Diesel Piston Plaster and Screed Pump

Diesel Piston Plaster and Screed Pump 10-150 Litre/Minute

ASE HSP/DM

Many screeds, plasters, and construction mortars are difficult to pump due to their compositions and chemical additives.

Higher pump pressures need to be applied for continuous use.

For pressures used continuously at 40 bar and above, mechanically driven cylinder pumps or screw pumps are not suitable.

This is the job of the double piston pump driven by this hydraulic power unit, namely, ASE HSP.

With the advantage of the hydraulic power unit in ASE HSP models, it is possible to change the pumping capacity and pressure adjustment according to the application needs.

ASE HSP operates with minimum wear part costs compared to screw pumps.

It is a model with a diesel engine and lifting mixer.

Application Areas

• Ready mortars or mixtures to be prepared in the construction environment with good pumpability in 0-8 mm granule distribution, difficult-to-pump mortars, cement or lime cement mortars, lightweight mortars with a high number of air pores,
• Screed mortars
• Light concrete
• Fiber-reinforced concrete
• Special plasters
• Classic (black) plaster
• Exterior plaster
• Jointing plasters
• Wall masonry mortar
• Floor covering
• Insulation plasters
• Injection mortars
• Spraying mortars
• Filling and bonding mortars
• Reinforcement and adhesive mortars
• ... and many more applications can be made.

Standard Equipment

• Mortar hose Ø 50 mm 40 bar 20 m with coupling
• Mortar hose Ø 50 mm 40 bar 10 m with coupling
• Mortar hose Ø 35 mm 40 bar 10 m with swivel head coupling
• Mortar hose reduction 50/35 mm
• Air hose 10 mm 41 m (3 pieces)
• Combined mortar pressure gauge 0-60 bar
• Spraying gun 35 mm, nozzle 18 mm
• Double piston compressor 400 l/min.
• Cleaning ball 60 mm, 2 pieces
• Cleaning ball 50 mm, 2 pieces
• Air hose cleaning device
• Tool
• Equipment set
• Vehicle towing unit
• Remote control

Technical Data

• Pumping capacity:*10-150 l/min.
• Pumping pressure:*60 bar
• Continuous working pressure:*40 bar
• Maximum granule 8-10 mm
• Pumping distance:*200 m
• Pumping height:*60 m
• Operation: diesel, 2 cylinders
• Main drive motor: 25 kW 3000 rpm
• Mortar piston diameter: 100 mm
• Stroke length: 327-330 mm
• Mixer capacity: 220 l
• Compressor capacity: 400 l/min., 8 bar
• Vibrator: 12 V, 205 kg
• Vibrating sieve: 8 mm
• Remote control: pneumatic + cable
• Material outlet: 2”
• Suction connection: 4”
• Drive equipment: braked torsion axle
• Pumping hose: Ø 50 mm
• For spraying: Ø 35 mm
• Dimensions (L/W/H): 2900/1860/1630 mm
• Loading height: 940 mm
• Weight: 1800 kg