Thyristor Controlled Transformer Type Air Cooled Coating Rectifier

Redarti Transformer Type Air Cooled Rectifier

Microprocessor-controlled thyristor rectifiers are fully automatic power sources used in industry to provide direct current required for processes such as coating, painting, anodizing applied to metals and plastics through electrolysis. Controlled by a microprocessor, thyristor control provides high accuracy and precise regulation, resulting in high-quality outcomes in the process it is used. One of the most important features of thyristor-controlled systems is Pulse - Base current control. In coatings realized with Pulse - Base method, the coating reaches even the most difficult corners regardless of the shape of the parts. The problem of insufficient coating seen in hard-to-reach areas is eliminated. The overall coating distribution on the part is more proportionate and saves time. Coating processes carried out using 600Hz and Pulse - Base method offer a quality far beyond traditional methods in every aspect.

Redarti Transformer Type Air Cooled Rectifier Technical Information

New AC Drive Units RERARTI Coating rectifiers are equipped with a new AC power control unit. With this unit, rectifier failures are minimized, while the operating efficiency and functions of the rectifier are increased. Disabilities are prevented without any damage with the new AC drive unit. This allows it to be used safely even under the most difficult conditions. The new Drive system has the ability to operate from both the remote control unit and the automation system at the same time. In addition to many ready-made features, it is open to additional features to be added over time. Timer With the timer in the operating program, operation for the desired time or indefinitely can be ensured. In timed operation, the rectifier operates at the desired values and automatically stops at the end of the period. It warns the user when the process is completed. In continuous operation, the process continues until the user stops the device. Ampere-Hour and Automatic Dosing REDARI Coating rectifiers are equipped with an Ampere-Hour calculation feature. This provides the most reliable data on the total working time of the bath. The coating process can be operated based on the ampere-hour value instead of time. Both ongoing coating process and total operations have different counters on the operator panel. These counters can be used to automatically add chemicals to the bath. Chemical concentration control is extremely important, especially in critical baths. REDARTI rectifiers assist in your chemical control and provide important data on the total operation and efficiency of the system. Selective Operation Program In many coating baths, a selective operation program is applied to remove unwanted metals from the bath. However, this process was being carried out manually or with an external system. In the selective operation program offered in REDARTI coating rectifiers, this process is automated. After the process is started, the output voltage is increased to zero at the set interval and then returns to zero. This process is repeated at set intervals or indefinitely. This makes the labor-intensive maintenance process of selective operation easy to perform. Easy to Use REDARTI Standard Coating rectifiers have an extremely simple operating program. The operator can easily start the device without going near the rectifier thanks to the remote control unit. The system is fully compatible with all automation systems. It has both manual and automation system operating capabilities.