| Numéro de l'annonce: | #00214533 |
| Catégorie : | Darbe Test Cihazı |
| Marque: | Labomak |
| Type de produit : | À vendre |
| État du produit: | Aucun |
| Origine: | Turquie |
| Emplacement : | İkitelli OSB Mah. / Başakşehir / İstanbul |
| État de la garantie: | 2 Yıl Garantie |
| Detail des ventes: | , |
| Statut de livraison : | En stock |
HARPY HAMMER LIST STANDARD HAMMER CAPACITY (j) MASTER CENTER (mm) FALL ANGLE (°) WEIGHT (kg) ISO 179-1 2 J 395 95 0.475 ISO 179-1 4 J 395 95 0.950 ISO 179-1 5 J 395 95 1,188 ISO 179-1 7.5 J 395 150 1.038 ISO 179-1 15 J 395 150 2,075 ISO 179-1 25 J 395 150 3.458 ISO 179-1 50 J 395 150 6,916 ISO 180 5.5 J 335 150 0.897 ISO 180 11 J 335 150 1,794 ISO 180 22 J 335 150 3,588 Both Charpy and Izod impact testing are popular methods of determining a material's impact strength or toughness. In other words, these tests measure the total amount of energy a material can absorb. This energy absorption is directly related to the brittleness of the material. Brittle materials like ceramic or glass tend to have lower absorption rates than ductile materials like copper or aluminum. Understanding the energy absorption properties of a material is important because it predicts how much plastic deformation the material can withstand before catastrophic failure. It is also important to understand the similarities and differences between these two common impact testing methods. Charpy unnotched impact strength , the impact energy absorbed when breaking a non-notched test specimen (relative to the original cross-sectional area of the test specimen. Charpy notched impact strength , acN, impact energy absorbed by a notched test specimen when breaking. An edge blow is a blow made in a direction parallel to its size. Impact test is made on the narrow surface in the longitudinal direction of the sample. Blow by the flat , the blow made in the direction parallel to its size. The large surface in the longitudinal direction of the impact test specimen is made on it. Vertical impact , (layered-reinforced plastics) impact is perpendicular to the reinforcement plane Parallel impact , (layered-reinforced plastics) impact is made in the direction parallel to the reinforcement plane Charpy Impact Test The test apparatus consists of a weighted pendulum dropped from a certain height to make contact with the sample. The energy transferred to the material can be deduced by comparing the difference in the height of the pendulum before and after the fracture. A Charpy test specimen placed horizontally on the machine is typically an 80 x 10 x 4mm material with a machined notch on one of the faces. This notch, which can be V-shaped or U-shaped, is placed facing away from the pendulum and helps concentrate stress and encourage fracture. The Charpy impact test is most commonly performed for ASTM E23, ASTM A370, ISO 148 or en 10045-1. While testing is most commonly performed on metals, there are a number of standards that exist for plastics and polymers, including ASTM D6110 and ISO 179-ISO 180. Izod Impact Test The test apparatus and specimen design are very similar to the charpy effect, with some important differences including the orientation of the specimen, which compresses the apparatus vertically with the pendulum's notch facing toward it. The pendulum then impacts the sample in a specific area on the notch. One of the main differences of the Charpy impact is that the Izod impact test can be performed on plastic or metallic samples. Plastic specimens are typically 64 x 12.7 x 3.2 mm rods with machined V-shaped notches. Metallic specimens are usually 127 x 11.43 mm bar round with 1 or 3 machined V-shaped notch(s). Common Izod impact test methods include ASTM D256, ASTM E23, and ISO 180. Product features LABOMAK CHARPY-IZOD IMPACT TESTER STANDARD FEATURES Easy and long-lasting use with 4.3″ touch screen, 150 º drop angle, 3.8 m/s falling speed CHARPY: 0.5, 1.2, 4 ,5 7.5, 15, 25, 50 J HAMMERS/ ISO 179-1 IS COMPREHENSIVE IZOD: 1, 2.75, 5.5, 11, 22 J HAMMERS/ ISO 180 EXTENSIVE Electronic drop mechanism Automatic hammer braking feature Electronic hammer calibration Protective visor frame ADDITIONAL FEATURES * Possibility of special program software according to user's request TECHNICIAL SPECIFICATIONS * Height: 80 cm Labomak ISO 179-1
2-50 Joules Impact Tester
* Manufacturing of hammers in desired capacity
* Width: 75 cm
* Depth: 35 cm
* Weight: 120 kg
* Working Voltage: 220 VAC. * 0.2 kW
Politique de retour de Makinaturkiye.com
Les achats effectués via Makinaturkiye.com offrent une expérience d'achat sécurisée mettant l'accent sur la satisfaction du client. Le bouton d'achat crée un formulaire d'achat au lieu de traiter directement le paiement, mettant ainsi en relation le vendeur et l'acheteur. Dans ce processus, les retours de produits sont évalués conformément au Règlement sur les droits des consommateurs en Turquie et sont traités dans le cadre juridique déterminé.
Processus de retour et conditions
Période de retour :
Produits pouvant être retournés :
Comment effectuer un retour ?
Processus de remboursement après retour :
Produits non retournables :
Droits de retour dans le cadre de la législation turque sur les droits des consommateurs
Droit de rétractation :
Retour de produit défectueux :
Pour vos demandes de retour La plateforme Makinaturkiye.com fait le lien entre l'acheteur et le vendeur. Pour obtenir des informations détaillées sur le processus de retour ou pour soumettre une demande, vous pouvez contacter directement le vendeur via le formulaire d'achat.
| Pays | Devise | Frais de port minimum | Frais de port maximum |
|---|