Sarot Softener
Lime Removal and Fully Automatic Water Softening System
The water softening process is carried out by the ion exchange method. Water containing calcium and magnesium (Ca2+ and Mg2+) ions that cause hardness is passed through a cationic resin in the form of sodium, while hard water passes through the sodium-based cationic resin, the hardness ions in it become softer by replacing the Na+ ions attached to the resin.
SOFTENING/DECALCING
Softening systems can be designed in 3 different ways;
TIME CONTROLLED
Softening systems perform the regeneration process as a temporal period, on the desired day of the week, at the desired time, without any intervention. The resin, which has reached saturation, regenerates with salt water in a time-controlled manner, and calcium and magnesium ions are removed from the system.
FLOW CONTROLLED
Softening systems measure the amount of water that passes through the meter on the device and perform the previously programmed regeneration process. The resin that reaches saturation enters into regeneration with salt water under a controlled flow rate, and calcium and magnesium ions are removed from the system.
TANDEM
Tandem softening systems consist of two softening units. The system can be controlled according to the amount of flow, or the planned time, or both. In the tandem system, each softening unit enters into regeneration in turn and when it is ready, it waits for the other unit in the treatment to saturate and transfer the treatment to itself. In this way, uninterrupted soft water is obtained 24 hours a day without waiting for regeneration processes.
SYSTEM FEATURES
COMMERCIAL SYSTEMS
Factories, Hotels, Schools, Hospitals, Dormitories, etc. with an hourly water consumption of less than 5m³. uses are low-cost systems designed.
Polyethylene inside, glass fiber coil wound test pressure 10 bar operating pressure 6 bar filter tanks
Low maintenance costs with ball valve valves instead of pistons
Mushroom diffusers on the mirror in the sub-distribution structure
Filling and unloading manholes
Backwash with clean water
Backwash with raw water in backwash
Automatic programmable backwash
Backwash to desired time of day*
No-bypass during backwashing (which cuts off the outgoing water)
Yes-bypass during backwash (does not cut off the outgoing water)
Backwash according to differential pressure
Ventilation with blower
Automation with touch screen and remote control
It can be transferred to SCADA, monitored remotely and the facility can be intervened.
INDUSTRIAL SYSTEMS
Factories, Social Facilities, Rural Settlements, Neighborhoods, Towns, etc. with an hourly water consumption between 5 -20 m³. systems designed for use.
Polyethylene inside, glass fiber coil wound test pressure 10 bar operating pressure 6 bar filter tanks
Low maintenance costs with ball valve valves instead of pistons
Mushroom diffusers on the mirror in the sub-distribution structure
Filling and unloading manholes
Backwash with clean water
Backwash with raw water in backwash
Automatic programmable backwash
Backwash to desired time of day*
No-bypass during backwashing (which cuts off the outgoing water)
Yes-bypass during backwash (does not cut off the outgoing water)
Backwash according to differential pressure
Ventilation with blower
Automation with touch screen and remote control
It can be transferred to SCADA, monitored remotely and the facility can be intervened.
MASS SYSTEMS
Factories with hourly water consumption of 20 m³ and above, City Network Waters of Provincial/District Municipalities, etc. systems designed specifically for use.
Polyethylene inside, glass fiber coil wound test pressure 10 bar operating pressure 6 bar filter tanks
Low maintenance costs with ball valve valves instead of pistons
Mushroom diffusers on the mirror in the sub-distribution structure
Filling and unloading manholes
Backwash with clean water
Backwash with raw water in backwash
Automatic programmable backwash
Backwash to desired time of day*
No-bypass during backwashing (which cuts off the outgoing water)
Yes-bypass during backwash (does not cut off the outgoing water)
Backwash according to differential pressure
Ventilation with blower
Automation with touch screen and remote control
It can be transferred to SCADA, monitored remotely and the facility can be intervened.