| Numéro de l'annonce: | #00192544 |
| Catégorie : | Écran horizontal |
| Marque: | Polygonmach |
| Type de produit : | À vendre |
| État du produit: | Aucun |
| Origine: | Turquie |
| Emplacement : | Saray Mahallesi / Kahramankazan / Ankara |
| État de la garantie: | 2 Yıl Garantie |
| Detail des ventes: | , , , , , , , , , |
| Statut de livraison : | Sur commande |
Polygonmach PMCYE
Titreşimli Yatay Elek / Vibrating Horizontal Screen
PYE2260
: 2000mm X 6000mm
: 3 Güverte
: 2 X 30 kW, 1000 rpm Şaftlı
: 250 - 350 t/saat
: 0 - 150mm
: 1000 d/d
: Gövde Sacları ST37 A1 Kalite 12mm Sacdan imal edilecektir. Rulman Altları Aynı Kalite 20mm Sac İle Desteklenmektedir. Elek Tabakaları Kaynaklı Kafes Yapısında Üretilip Gövdeye Civatalarla Bağlanmıştır.
: Cr-Ni-Mo Alaşımlı Çelikten Üretilmiştir.
: Elek Katmanları Civatalı Sistem ile 100 mm HEB'den imal edilmektedir.
: Kolay Ayarlanabilir Ağırlık Çiftleri ile Ayarlanabilir Titreşim Şiddeti.
: Gövde 16 Helisel Yay Üzerine Oturur ve Yatağa Bağlı Ayarlanabilir Eksantrik Ağırlıkların Dairesel Hareketi İle Sağlanır.
: Elek Yivleri ST37 A1 Kalite 6mm Sacdan İmal Edilmiştir.Elek Ön Yiv Opena Ray Sistemi İle Kısa Sürede Elek Tel Değişimi Yapabilmenizi Sağlar.Alt Dağıtıcı Yivleri Ürüne Erişim Kolaylığı Sağlar.
Dairesel Hareket Mekanizması Sayesinde Bantlar.
: GS 52 Çelik Döküm Parçalar Kullanılacaktır.
: SKF veya FAG Mark Ağır Hizmet Özel Titreşimli Oynak Makaralı Rulmanlar.
: Standart Yapıda 200 X 200 Kutu Profilden Üretilmiştir.Taşıyıcı Ayaklar İçten Desteklidir.
Boru Profilleri ile Çapraz Yapı.
: Sprink Tipi Olacak ve Her Katta Yıkama Olacaktır.
PYE2260
: 2000mm X 6000mm
: 3 Deck
: 2 X 30 kW, 1000 rpm Shaft
: 250 - 350 t/h
: 0 - 150mm
: 1000 rpm
: Body Sheets will be made of ST37 A1 Quality 12mm Sheet Metal. Bearing Bottoms are Supported by the Same Quality 20mm Sheet. Sieve layers are produced in a welded cage structure and connected to the body with bolts.
: Made of Cr-Ni-Mo Alloy Steel.
: Screen Layers are manufactured from 100 mm HEB with Bolted System.
: Adjustable Vibration Intensity with Easily Adjustable Weight Pairs.
: The body sits on 16 helical springs and is provided by the circular movement of the adjustable eccentric weights attached to the bed.
: The Sieve Grooves are made of ST37 A1 Quality 6mm Sheet Metal. The Sieve Front Groove Allows You to Change the Sieve Wire in a Short Time with the Opena Rail System. Lower Distributor Grooves Provide Ease of Access to the Product.
Bands Thanks to Circular Movement Mechanism.
: GS 52 Cast Steel Parts will be used.
: SKF or FAG Mark Heavy Duty Special Vibrating Spherical Roller Bearings.
: It is produced from 200 X 200 Box Profile in Standard Structure. Carrier Feet are Internally Supported.
Cross Structure with Pipe Profiles.
: It will be sprinkle type and there will be washing on each floor.
Politique de retour de Makinaturkiye.com
Les achats effectués via Makinaturkiye.com offrent une expérience d'achat sécurisée mettant l'accent sur la satisfaction du client. Le bouton d'achat crée un formulaire d'achat au lieu de traiter directement le paiement, mettant ainsi en relation le vendeur et l'acheteur. Dans ce processus, les retours de produits sont évalués conformément au Règlement sur les droits des consommateurs en Turquie et sont traités dans le cadre juridique déterminé.
Processus de retour et conditions
Période de retour :
Produits pouvant être retournés :
Comment effectuer un retour ?
Processus de remboursement après retour :
Produits non retournables :
Droits de retour dans le cadre de la législation turque sur les droits des consommateurs
Droit de rétractation :
Retour de produit défectueux :
Pour vos demandes de retour La plateforme Makinaturkiye.com fait le lien entre l'acheteur et le vendeur. Pour obtenir des informations détaillées sur le processus de retour ou pour soumettre une demande, vous pouvez contacter directement le vendeur via le formulaire d'achat.
| Pays | Devise | Frais de port minimum | Frais de port maximum |
|---|