400x400 mm Wastewater Filter Press

400x400 mm Wastewater Filter Press

The basic working principle of the Filter Press is a machine that performs the separation of products such as (sediment, sludge, cake) from the liquid.

The filtration process is carried out by sending the product to the filter press with the help of a pump. The product passes through the plates in the filter and reaches the filter cloths, while the liquid products are filtered through the cloth and exit the filter, the solid (cake) part that is not liquid gets compressed between the filter press plates and takes the form of a cake. The process is completed when the cake section between the plates is filled, and the filter press is opened. The plates are separated, and the cake sludge in between is cleaned. After the cleaning process is completed, the plates are compressed again, and the filter press machine is ready to operate again.

Types of Filter Press

Manual Filter Press: The operations of plate separation, plate compression, and plate cleaning are performed by the operator.

Semi-Automatic Filter Press: The operations of plate separation and compression are performed with the help of a control panel. The plate cleaning process is done with the help of the operator.

Fully Automatic Filter Press: The operations of plate separation, compression, and plate cleaning are performed from the control panel.

Filter Press Sizes

• 250x250 mm

• 260x260 mm (Full Empty)

• 400x400 mm

• 630x630 mm

• 800x800 mm (Full Empty)

• 800x800 mm

• 1000x1000 mm

Filter Press Plate Types

Square Chamber Filter Press Plate: Filter press plates are generally preferred in sectors such as sludge dewatering, wastewater treatment, treatment sludge, liquid fertilizer, chemicals, paint, medicine, mining, etc.

Full Empty Square Filter Press Plate: Filter press plates are generally preferred in sectors such as oil filtration (Olive oil, Sunflower oil, Safflower oil, Canola oil, Industrial type oils), food, etc.

Filter Press Prices

Filter press prices vary according to the number of plates and filter sizes. After determining the desired capacity, if you contact us, we can prepare and send you the most suitable filter press price offer.

❖ Description:

The Hydraulic Filter Press is one of the most commonly used machines for dewatering sludge. It is widely used in medicine, chemical industry, food, mining, and other industries for sludge dewatering, wastewater treatment, and solid-liquid separation.

The hydraulic filter press mechanism consists of a hydraulic cylinder, piston, piston rod, and a pressure plate connected to a piston rod, structural components of hydraulic motors, pumps, directional valves, pressure gauges, pressure relief valve for fuel lines (adjustable pressure), fuel tank.

The Hydraulic Filter Press is pressed by a hydraulic station for the piston cavity filled with liquid consisting of a high-pressure oil cylinder and elements.

The Hydraulic Filter Press is pressed by a hydraulic station for the piston cavity filled with liquid consisting of a high-pressure oil cylinder and elements, when the pressure is greater than the friction resistance of the pressure plate during operation, the pressure compression force reaches the adjustable pressure value of the relief valve (shown with a pressure gauge), and presses on the filter plate, filter box (frame type), or plate (valve), starts to discharge the relief valve, then the motor is turned off, and the pressing process is completed.

1- High pressure force (17-20MPa) can effectively prevent leakage.

2- The hydraulic station adopts ABB motor, which is stable in operation.

3- Automatic shutdown and manual opening.

4- Labor-saving.

5- Especially valid for large-capacity models, can provide good filtration effect.

The machine's safety systems have been audited and approved with these certificates:

ISO 9001:2015
ISO 14001:2015
CE TRC-21-1811/01/01