Ø 4-8 Mm 2400 Mm Steel Mesh Welding Machine 2
2400 Mm Steel Mesh Welding Machine Ø 4-8 mm
MESHMATIC P SERIES HKM24P08
MESHMATIC C SERIES HKM24P08 Technical Specifications
Capacity :
Machine speed: 90 strokes/minute
Mesh Width: 2400mm
Mesh Length: 6000mm
Minimum bar diameter 4-8mm
Length bar diameter 4-8mm
Minimum eye spacing 50-300mm (from operator panel)
Length bar range: 75-1mm manually adjustable
Machine Components
1) LENGTH BAR FEED MECHANISM
2) WELDING UNIT
3) MINIMUM BAR DISCHARGE
4) MESH EJECTION
5) AUTOMATION PANEL
1) Controlled by Servo Motor.
24 holders can be attached.
Length range can be adjusted from the computer.
|
Feed distance: |
50-300mm |
|
Feeding system: |
Servo motor |
|
Holder: |
24 pieces |
|
Control valve : |
8 high flow. |
2) Consists of lower electrode, upper electrode, and 9 transformers of 120 KVA.
The length bars coming from the feeding unit and the minimum bars coming from the minimum bar discharge unit are held together by a magnet, and the welding pistons compress the bar
and welding is done with the energy coming from the transformer.
|
Welding Transformer: |
9 pieces 120KVA |
|
Welding piston: |
24 pieces 90mm tandem |
|
Valve: |
24 high flow |
|
Welding head: |
12 pieces 75-100mm 8 pieces 150mm 6 pieces 200-250mm |
|
Welding bar: |
24 water-cooled copper bars |
|
Lower electrode holder: |
24 water-cooled |
|
Magnet: |
6 pieces (connected to sensor cable) |
3) The magnetic bar from the minimum bar warehouse takes a certain amount of minimum bar and leaves it in the servo motor compartment.
The servo motor takes the bars one by one and gives them to the ejection unit.
The ejection process is done with pistons.
It throws the minimum bar towards the magnet.
|
Warehouse capacity : |
1000 kg |
|
Intermediate warehouse motor: |
1.1kw asynchronous |
|
Minimum bar motor: |
0.75kw Servo |
|
Minimum bar receiver: |
Adjustable 4-8mm |
|
Bar ejector : |
6 pieces |
|
Ejection motor : |
0.75kw asynchronous |
|
Ejection roller : |
8 rubber-coated |
5) Inside the panel, there are 9 pieces of 800Amp disk thyristor welding units.
PLC and motor control systems are compatible with each other.
There is an internet output via Ethernet.
|
PLC: |
Panasonic - Mitsubishi |
|
Operator panel: |
Delta -Mitsubishi |
|
Asynchronous Drives: |
Mitsubishi |
|
Servos: |
Mitsubishi |
|
Switching system: |
Schnider |
|
Welding system: |
9 thyristor |
Brokerless Trade without Commission
All Communication Channels
Available on mobile phones
Open a Store and Post an Ad