4-12 Mm Diameter 2600 Mm Mesh Welding Machine

2600 Mm Mesh Welding Machine 4-12 mm diameter

MESHMATIC S SERIES HKM26S12

Technical Specifications of MESHMATIC S SERIES HKM26S12

Capacity :

Machine speed: 70 strokes/minute

Mesh Width: 2600mm

Mesh Length: 6000mm

Minimum bar diameter 4-8mm

Length bar diameter 4-8mm

Minimum eye spacing 50-300mm (from operator panel)

Length bar range: 75-1mm manually adjustable

Machine Components

1) LENGTH BAR FEEDING MECHANISM

2) WELDING UNIT

3) MINIMUM BAR EJECTION

4) MESH PULLING

5) MESH EJECTION

6) AUTOMATION PANEL

1) Length bars placed in the channels are fed into the machine with the feeding cart.

It is possible to insert 24 length bars.

While welding 8mm, a maximum of 18 bars can be inserted.

Bars are centered by nozzles

2) Lower electrode, upper electrode, and consists of 6 transformers of 120 KVA.

Length bars coming from the feeding unit and minimum bars coming from the minimum bar ejection unit are held together by the magnet, and the welding pistons compress the bar

and welding is done with the energy coming from the transformer.

3) The minimum bar is taken from the storage by a magnetic bar and left in the servo motor compartment.

The servo motor takes the bars one by one and gives them to the ejection unit.

The ejection process is done with pistons.

It throws the minimum bar towards the magnet.

4) The mesh pulling system operates with a servo motor-controlled linear slide.

The clamps catch the mesh from the minimum bar and pull it step by step.

6) Inside the panel, there are 6 pieces of 800Amp disk thyristor welding units.

PLC and motor control systems are compatible with each other.