Pusher Centrifuge
İlan No: | #00223855 |
Kategori: | Santrifüj Pompa |
Marka: | Özyurt Makine |
Model Tipi: | Ö-SP001 |
Ürün Tipi: | Satılık |
Ürün Durumu: | Sıfır |
Menşei: | Türkiye |
Teslim Durumu: | Stokta Var |
Konum: | Habibler Mah. / Sultangazi / İstanbul |
Satış Detayı: | Havale / EFT, Görüşülür |
Satıcıyla iletişim kur
Özyurt Makine
Pusher Centrifuge
Pusher centrifuges are continuous filtering centrifuges used for dewatering and washing free-draining bulk crystalline, polymer, or fibrous materials . Where suited, they provide the best washing characteristics of any continuous centrifuge due to control of retention time, uniform cake bed, and essentially plug flow of solids through the unit . For a typical appli- cation such as salt, they range in capacity from about 1 ton/h for small (250-mm-diameter) units up to about 120 tons/h or more in the largest units (1250-mm-diameter) . They are generally applied where the mean particle size is at least 150 µm . Typical solids retention time is between 10 and 30 s . Normally the machine is fed by a feed pipe, but it can also be used as post- treatment of a prior dewatering step such as a vacuum filter . In this case it is fed by a feed screw . Due to the gentle handling of the product, pusher centri- fuges are better suited Due to the gentle handling of the product, pusher centri- fuges are better suited for fragile crystals than are other types of continuous filtering centrifuges
Model | Nominal Diameter (mm) | Length | Width | Height | Capacity (stph) | Power (kw) |
---|---|---|---|---|---|---|
OSP-250 | 250 | 1800 | 1200 | 600 | 5.5 | 7.5 |
OSP-350 | 350 | 2200 | 1300 | 650 | 7.5 | 11 |
OSP-450 | 450 | 2500 | 1700 | 1000 | 15 | 22 |
OSP-600 | 600 | 2600 | 1750 | 1450 | 20 | 30 |
OSP-800 | 800 | 2800 | 1900 | 1300 | 25 | 37 |
OSP-1000 | 1000 | 3500 | 2600 | 1800 | 75 | 110 |
OSP-1200 | 1200 | 3800 | 3000 | 2400 | 100 | 150 |
- Low energy consumption
- Outstanding product quality
- Unmatched capacity
- Superior maintenance concept
Avarage particle size: 80-2000 µm
Solids throughput: up to 150 t/h
Solids recovery: > 98%
Solids concentration of slurry to be seperated:
- for crystalline products: 30-75 M%
- for fibrious products: 2-12 M%
- for plastics: 5-25 M%
With the mechanical drive, a worm screw is driven by a motor via a V-belt. An eccen- tric converts the rotary motion of the gear output shaft into a pusher motion. The pus- her frequency depends on the ratio of the V-belt drive of the motor to the worm gear. Pusher centrifuges with a mechanical drive are extremely maintenance-friendly. This is because no significant maintenance work is required apart from recurrent lubrication of the bearings. The individual drive components can be replaced without disassembly of the centrifuge. A major advantage: The machine does not require cooling water. Machines with a basket diameter of 250, 350, 450, 600, 800, 1000 and 1200 mm are fitted with the mechanical drive system.
Kargo Fiyat Bilgi Listesi
Ülke | Para Birimi | En Düşük Kargo Fiyatı | En Yüksek Kargo Fiyatı |
---|