Glass Water Thermoforming Packaging And Packaging Machine

Fiyat Sorunuz
Min. Sipariş 1 Adet

İlan No: #00234373
Kategori: Termoform Ambalaj Makinası
Marka: Maksivak
Model Tipi: MVZ 18-57
Ürün Tipi: Satılık
Ürün Durumu: Sıfır
Menşei: Türkiye
Teslim Durumu: Stokta Var
Konum: Yenidoğan Mah. / Bayrampaşa / İstanbul
Satış Detayı: Havale / EFT, Görüşülür

Satıcıyla iletişim kur

Maksivak Makina

Maksivak Otomatik Paketleme Ambalaj Makina San. ve Dış Tic. Ltd. Şti.

Danışman : Maksivak O.

Maksivak MVZ 18-57

Glass Water Thermoforming Packaging and Packaging Machine

Thanks to the wear cutting system of our machine, the gaps between the cups are reduced and the same amount of cups can be produced with less pitch and foil width. Existing machines in the sector are replaced, saving 3.125% on the lower foil and 5.55% on the upper foil. In case of a new hobby getting stuck or if there is a problem with the foil, as in other companies, the foil must be pulled through the machine in order to get it back in shape. This results in wasting of foil as much as the length of the machine and a loss of time in this process. Thanks to the chain system used in our machine, foil can be fed to the chain and the production can be continued immediately. This saves time and foil. In pulling system machines, the advancement of the foil is achieved by holding the foil from one point at the pulling station and pulling it throughout the machine. This makes the foil very sensitive to factors such as cooling of the temperature, having different rigidities and stretching or shortening. For these reasons, slippage occurs in the pitches. It requires constant retuning of stations.
Since the advancement of the foil in the chain system in our machine depends on the advancement speed of the chain, it is not affected by the physical changes of the foil.
Since the foil is held at the edges by a chain, the foil's sagging towards the middle is minimized. In this way, healthier positioning can be achieved. Since this cannot be achieved in pull-out machines, differences can be seen between the middle cup and the side cups.
In pull machines, foil advancement depends on the mechanism. Due to the structure of the mechanism, the potential for mechanical failure is high.

Maksivak MVZ 18-57 Technical Specifications

usage areas CONTAINER TYPES MACHINE TYPE
A glass of water 100cc 6 Water Machine
Fruit juice 150cc 8 Water Machine
Lemonade 180cc 10 Water Machine
Ayran 200cc 12 Water Machine
Honey 250cc 15 Water Machine
Jam 300cc 20' Water Machine
Butter special container Servo Water Machine
fruit yoghurt   Slim Cap Machines
Pudding   Special Cup Machines

Glass Water Thermoforming Packaging And Packaging Machine Yorumları

Bu ürüne yapılmış herhangi bir yorum bulunmamaktadır. İlk yorum yapan sen ol!
Komisyonsuz Aracısız Ticaret

Rekabetçi fiyatlar ile alın satın kiralayın

Tüm İletişim Kanalları

Telefon whatsapp mail ve tüm iletişim kanalları şeffaflığı

Mobil Cebinizde

Mobil uygulamamızı indirin takipte kalın

Mağaza Açın ve İlan Verin

Kolay kullanım sunan portalımızda alın satın kiraya verin