14 Head Chamfering Machine
İlan No: | #00224499 |
Kategori: | Mermer Pah Kırma Makinaları |
Marka: | Som-Mak |
Model Tipi: | S-PM008 |
Ürün Tipi: | Satılık |
Ürün Durumu: | Sıfır |
Menşei: | Türkiye |
Teslim Durumu: | Stokta Var |
Konum: | / Orhangazi / Bursa |
Kısa Detay: | 1 Yıl Garantili |
Satış Detayı: | Havale / EFT, Görüşülür |
Satıcıyla iletişim kur
Som-mak
14 Head Chamfering Machine
Our Butt Polish Marble Granite chamfering machine provides Serial Standard production.
Easy to operate and maintain and Use
The feature of our machine is that it chamfers from the bottom.
The polished part of the marble is put on the band in a Future Way.
Our Butt Polishing Machine is Fully Automatic
Belt movement is electronically speed controlled.
Our machine is produced in 6+2 8+2 10+2 12+2 14+2 standards according to the Granite and Marble Type.
The engine part of our machine is completely free of water and is protected from water by inner and outer protective casings.
Back of Abrasive The seals that protect the head bearings are heat and abrasion resistant Felt.
All heads on the machine work independently of each other.
If desired, the heads can be disabled according to the operation.
The polishing heads come and go automatically with the entry of the stone and automatically close and go back when the stone comes out of the swishh.
There are 1 caliber, 5 lower chamfers, 6 chamfers, 1 deburring and 1 dropper saw on our 12+2 machine.
Our machine can process a maximum of 1500 mm with a Minimum 70/80 mm Bottom Support Jib Mechanism.
Bandwidth of our machine is 450
Our machine is Front Control Panel Controlled.
Lubricating Channels, Protective Panels for Abrasive Change, Shock Absorber Supported Fully Opening and Closing.
According to Special Requests, Herringbone Diamond can be inserted into our machine.
MODEL |
12 HEADS |
14 HEADS |
16 HEADS |
18 HEADS |
---|---|---|---|---|
Forehead Polishing & Engine Power |
5 units of 1.5 kW |
6 units of 1.5 kW |
7 units of 1.5 kW |
8 units of 1.5 kW |
Chamfer Polishing & Engine Power |
4 units of 1.5 kW |
5 units of 1.5 kW |
6 units of 1.5 kW |
7 units of 1.5 kW |
Chamfer Calibration & Engine Power |
1 unit of 2.2 kW |
1 unit of 2.2 kW |
1 unit of 2.2 kW |
1 unit of 2.2 kW |
Crispy Burr Chamfer Engine Power |
1 pcs 1.5 kW |
1 pcs 1.5 kW |
1 pcs 1.5 kW |
1 pcs 1.5 kW |
Dropper Saw & Engine Power |
1 unit of 2.2 kW |
1 unit of 2.2 kW |
1 unit of 2.2 kW |
1 unit of 2.2 kW |
Top Pressure Motor Power |
0.75 kW |
0.75 kW |
0.75 kW |
0.75 kW |
Band Reducer Motor Power |
1,5 kW |
1,5 kW |
1,5 kW |
1,5 kW |
Total Electric Motor Power |
21.00 kW |
25,50 kW |
29,50 kW |
34,50 kW |
min. Working Width |
70mm |
70mm |
70mm |
70mm |
Working Thickness |
10 - 40mm |
10 - 40mm |
10 - 40mm |
10 - 40mm |
Band Speed |
0 - 350 cm/min |
0 - 350 cm/min |
0 - 350 cm/min |
0 - 350 cm/min |
Length / Width / Height |
7100 x 1700 x 2100mm |
7500 x 1700 x 2100mm |
8100 x 1700 x 2100mm |
8500 x 1700 x 2100mm |
Required Water |
32 lt/min |
35 lt/min |
40 lt/min |
45 lt/min |
Saw Disc Diameter |
Q250mm |
Q250mm |
Q250mm |
Q250mm |
Pop-up Table Width |
1400mm |
1400mm |
1400mm |
1400mm |
Pneumatic Pressure |
1-3 bars |
1-3 bars |
1-3 bars |
1-3 bars |
Kargo Fiyat Bilgi Listesi
Ülke | Para Birimi | En Düşük Kargo Fiyatı | En Yüksek Kargo Fiyatı |
---|