350-400-450 Mm Semi Automatic Pickup Machine

The machine, which is mounted on a steel chassis, has a closed and oil chamber rail system with LINER Sled Kremier Transmission. It makes precise cuts at the desired cutting speed with the speed control and the given dimensions.
(  AUTOMATIC  ) The system is put into the automatic mode, the hive goes down manually, the wagon moves automatically, the stone starts to cut, the wagon comes to the top of the wagon, it waits.
All Steel is Used on the Side Cutting Machine with Wagon, Anti-corrosion Epoxy Paint Reinforcement, Special Transmission Rail System Closed Slideway is Purified from Water, LINER RAIL, Protective Bellows System is Integrated.

Our Machine Cuts 90 degrees and 45 degrees Reducer Works Automatically

A Flat Waterproof Motor is Used on Our Machine. Head Cutting Up and Down Inner Sleeve System Used in Bridge Cutting Machines to Provide Precise Cutting, Using Special Materials to Act as a Slippery Coupling.

Our Wagon Side Cutting Machine is designed as both Head Cutting Sizing and Side Sizing, XY Sizing with Full Measurement System.

Head rotation circular motion ( C axis ) of our machine is AUTOMATIC.

Our machine is AUTOMATIC with 45 degree movement with reducer.

Our Machine Sled Movement ( Y axis ) is AUTOMATIC / Manual

Our machine is WAGON Movement ( X axis ) AUTOMATIC / Manual

Both Manual, Automatic, Semi-Automatic, Fully Automatic, Available.

Head System is fixed at 45 degrees by cutting from 0 to 90 degrees

It provides automatic cutting with speed control with the help of reducer.

 STANDARD AUTOMATIC SIDE CUTTING MACHINE

Mounted on a steel chassis, machine has a closed railing with lubrication system. Makes accurate and sensitive cutting works of given dimensions, by using both moving speed control and cutting speed control.

Desired dimensions of the stone are valued to the analog screen and machine is taken to the mode of Cutting Dimensions. Crank of saw moves down and the carriage wagon moves automatically, starts to cut stone. When the carriage comes out from the stone, saw automatically moves to upwards. Carriage wagon comes to the starting point again. Tower motor counts to the required value and saw crank comes downwards again and starts to cut again. Cutting work keeps repeating like this way till the ending point.

In cutting direction, main saw cutting speed and carriage wagon speed can be adjusted to desired value. At the end of cutting point speed is steady to fast move.

Our side cutting machine is built on total steel construction. Anti-rust epoxy paints reinforcements, special transmission closed railing system is strengthened wit waterproof coverings.

Cutting system works with the help of 90 degrees and 45 degrees gearboxes.

Flat watertight engine models are used on our machine. Head movements are accurate and sensitive for quality of cutting works

Our side cutting machine is designed for both side cutting works and side trimming.

Rotation move of main head of the machine ( C axis ) is manual.

45 Degrees Move is manual by gearbox.

Sliding ways Moves ( Y axis ) automatic and manual.

Carriage wagon Moves ( X axis ) automatic and manual.

Can be operated both automatically and manually.

Head system makes cutting 0 – 90 degrees, steady at 45 degrees.

With the help of gearboxes speed controlled, machine makes cutting works automatically.

Information about the materials that used on the machine

Electric Motors: Gearboxes

* Motored gearbox for Sliding Ways (Gearbox 0.75 gamak motored gearbox)

* Motored gearbox for Piston Sliding (Gearbox 0.75 gamma motored gearbox)

* Motored gearbox for carriage wagon moves (Gearbox 0.75 inter motored gearbox)

* Gearbox for 45 degrees cutting moves (Volant/Gearbox)

* Flat watertight Engine for marble and granite cutting works ( 9.3 kw 1500 / 3000 dual rounded villager engine)

Movement / Walking Systems:

* 0,5'' steel sprocket mechanism for carriage wagon movement

* Head cutting movement system with the help of trapeze.

* Cable carrying systems are applied on functionality of sliding ways movement.

* Carriage wagon Closed sliding way walking equipment is provided with transmission crank.

Steel Construction of the Machine

*Side cutting machine is steel monoblocked and massive.

* Chassis is built up on material of 320 NPLU.

* Carriage wagon is designed from material of 80 X 20.

* Carriage awagon also has a steel chassis and processed on CNC machinery for 6 axes.

* Back tower is built from 10 mm massive sheet metal, designed to reduce the vibration of the machine.

* Upper sliding ways are processed on CNC machinery from 10 mm massive sheet metal with 8 mm between grid.

* Wagon parts , wagon wheels are founded from sifero gg50 alloy for resistance of wear.

* Piston System is massive steel thick pipe.

* All head cutting group parts are cleared on milling machine.

* Head group parts are covered with anti-corrosion and rust components.

……..……..THE OPERATING PROCEDURE OF THE MACINE………………

• The periodic maintenance of the machine has to be done daily, weekly and yearly.

• Lubrication of critical parts of the machine has to be done regularly. ( like hubs of the pressure wheels, sliding ways, motor lubricating pump, etc…)

• In case of any problems resulting from any weak or none maintenance, buyer firm pays for repairing and fixing expenses.

• Our company provides technical support as soon as possible depending on the conditions.

• In case of any faults depending on user or wrong operating, any intervention will be executed after an expert examination on the machine.

• It is under warranty in period of 1 years.

• It is buyers duty to supply cutting saws on the machine.

• Consumable parts of the machine are not included to the warranty. (like cutting saws)

• Accommodation and transportation experiences of installation crew, belongs to buyer firm.

…..….THE ACTS THAT YOUR SIDE HAVE TO DO ON STAGE OF INSTALLATION…...

• To supply 13 kw electricity to near the fuse panel of the machine, an electrician is needed on setting up for cable connections.

• To supply water plumbing near machine.

• It is needed to supply the cutting saws on the installation.

• The place needed for machine install : 7000 mm X 3000 mm X 2500 mm (height)

• One tin of machine oil (number 30) , one tin of Grease oil.

• Marble Side Cutting