690x450 mm Tilting Cup Machine
İlan No: | #00221848 |
Kategori: | Termoform Ambalaj Makinası |
Marka: | Çağ Makina |
Model Tipi: | KG-F74 |
Ürün Tipi: | Satılık |
Ürün Durumu: | Sıfır |
Menşei: | Türkiye |
Teslim Durumu: | Sipariş Üzerine |
Konum: | Zafer Mah. / Esenyurt / İstanbul |
Kısa Detay: | 1 Yıl Garantili |
Satış Detayı: | Leasing'e Uygun, Havale / EFT, Görüşülür |
Satıcıyla iletişim kur
Cag Makina KG-F74
690x450 mm Fully Automatic Thermoforming Packaging Machine
Full Automatic Thermoforming Machine
General features
- Synchronized forming and cutting with 85 degree rotating bottom plate
- spacing of the plate running between corrosion-resistant sliding plates of double-toothed chains
- Precise temperature control in upper and lower pan
- Separate temperature adjustment by means of thermoregulator in upper and lower mold;
- Precise setting with electric drive.
- Display of the operating parameters and control of the line with PLC
- Non-stop mechanical system with easy maintenance.
- Security system provided by sensors, plate sag, pressure drop, door opening, etc.
- PLC controlled Sensors measuring water and heat balance for the mold.
- Energy meter showing electricity consumption.
- PLC controlled, Digital meter cutting adjustment
- Controlling the seal speed and movements with the PLC-controlled seal motor (starting and accelerating slowly etc.)
TERMOFORM |
|
---|---|
Forming Area |
710 x 480 |
Maximum Cutting Dimensions (mm) |
690 x 450 |
Maximum forward Depth (mm) |
10 max |
Maximum Back Depth (mm) |
150 |
Max Sheet width(mm) |
750 |
Closing Power (kN) |
250 |
Upper Heater Power Rating(Kw) |
83 (full opt) |
Lower Heater Power Rating (Kw) |
66 (full opt) |
Idle Working Cycle (cycle/1’) |
33 |
Operating pressure (bar) |
8 |
PLATE FEEDING |
|
---|---|
Winding Holder |
Single |
Max Shaft Diameter (mm) |
1200 |
GENERAL FEATURES |
|
---|---|
Total Installed Power (full ops – Kw) |
190 |
Length (mm) |
11.300 |
Width (mm) |
3.500 |
Height (mm) |
3.400 |
Weight (Kg) Without Sorter |