D1000 Ultra Fine Grinding Mills

 

The core filter of UltraFineGrindingMill is that it combines solutions in the small world of ceramic grinding. Media and rough parts are converted towards each disc; where the reflux from the product separator will hold them in the mill until the ore has been ground with enough attrition and compression forces to discharge it down the middle of the mill. Because of this process, external devices are not always required, but cyclones or concentrators may be required before the mill to achieve a suitable operating performance.

 

Type	Grinding Chamber Volume (Litres)	Drive Capacity (kW)	Total Unladen Mass (t)	Dimension A (mm)	Dimension B (mm)	Dimension C (mm)
D1000	1000	355	15	6400	1500	2400
D3000	3000	1120	23	16500	2950	2400
D10000	10000	2600	62	20000	3290	3450

UltraFineGrindingMill is available in various sizes; The mill model is provided with the hopper volume in liters. For example, the D10000 has an internal volume of 10,000 or 2.40 gal. UltraFineGrindingMill is installed in a variety of regrinding and UFG tasks in copper, lead/zinc, platinum, gold, molybdenum, nickel and iron ore tasks.

 

The basic principle of the UltraFineGrindingMill is that it fluidizes a charge of small ceramic grinding media. Media and coarse particles are centrifuged to the outside of each disc where backflow from the product separator keeps them in the mill until the ore is ground enough by attrition and compressive forces to pass down the middle of the mill and discharge. Because of this process, external classification is not always required, but cyclones or thickeners may be required ahead of the mill to achieve a suitable operating density.
The UltraFineGrindingMill comes in a variety of sizes, with the mill model denoted by the chamber volume in liters. For example, the D10000 has an internal volume of 10,000 or 2.40 gal. UltraFineGrindingMill are installed in several regrind and UFG duties in copper, lead/zinc, platinum, gold, molybdenum, nickel, and iron ore duties.