3000X2000 mm Water Jet (Waterjet) Cutting Machine 2

3000X2000 mm Water Jet (Waterjet) Cutting Machine

143 Görüntülenme Robjet Robotik Otomasyon Sujeti Sistemleri Makine San. Tic. Ltd. Şti.

tarafından 2.12.2022 tarihinde eklendi.

Diğer Videolar Tüm Ürünler

Su Jeti-CUTJET-W3-3020

Satılık-Sıfır - Yeni

Fiyat Sorunuz Ürünü İncele

Robjet CUTJET-W3-3020

3 Axis 3000x2000 mm Water Jet (waterjet) Cutting Machine

300X2000x200 mm CUTJET-W3-3020

CUTJET-W3 Waterjet Cutting Machine; It is a 2D cutting bench used for cutting many materials such as glass, marble, granite, metal, plexiglass.

As it is a cold process, problems such as combustion, droplet and deformation caused by thermal reasons will be prevented.

Features

Our systems are rack gear drive system.
In the Z Axis, a screw shaft is used for motion transmission and a heavy-duty ball circulating trolley bed mechanism is used for bedding.
Protection bellows are in rectangular cross-section, completely closed form. It is impossible for water and abrasive to reach the bearing, drive element, motors and electrical equipment.
All protection sheets and water tank are stainless steel.
Abrasive dosing unit is stepper motor driven and insulated against water and moisture.
The main chassis is made resistant to water and humidity by going through the stages of sandblasting, epoxy priming and epoxy painting.
The machine body is manufactured in the structure of the bridge axis with an aluminum construction machined on a steel chassis machined body. Thus, precise cutting can be done by preventing vibration.

3 Axis 3000x2000 mm Water Jet (waterjet) Cutting Machine Technical information

Technical information
Cutting Axes	CUTJET-W3-3020		CUTJET-W3-4020
X Axis	3000	mm	4000	mm
Y Axis	2000	mm	2000	mm
Z Axis	200	mm	200	mm
Max. Sheet Dimensions	3000x2000	mm	4000x2000	mm
Dynamic
Max. Speed X Axis	60		m/min.
Max. Speed Y Axis	60		m/min.
Max. Acceleration X Axis	10		m/s^2
Max. Acceleration Y Axis	10		m/s^2
Max Cutting Speed	2		m/min.
Sensibility
Positional Accuracy ±	0.05		mm
Repeatability ±	0.03		mm
Control unit
CNC	Fagor / Beckhoff
Screen	11” / 21”
Feeding Power	380VAC 50hz 3 Phase

High Pressure Pump

AQRO S50C+ high pressure pump (waterjet pump) provides fast and smooth quality cutting with a continuous cutting pressure of 3800 bar.

Abrasive dosing unit

The sand mixer is located on the z-axis. The sand that is ready in the abrasive sand tank passes through a certain strainer and the cutting process is carried out. Depending on the material type and thickness, the sand flow rate can be adjusted automatically or manually from the CNC control unit. min. 60 gr/min, max. It can be increased up to 600 gr / min.

Abrasive Hopper Sand Barrel

It enables the abrasive sand to be transported to the sand mixer with the help of compressed air. With the conditioner on it, the air is adjusted to 2 bar level, at the same time it dehumidifies the air entering the sand tank. Abrasive sand tank capacity max. It is 200 lt.

Control unit

The pre-cut parameters of standard materials (marble, ceramic, steel, stainless, aluminum, copper, composite, glass, brass, felt) in certain thicknesses are entered into the system by ROBJET instructors. Considering these reference values, the operator improves the cutting quality with small adjustments according to the changing sheet qualities.

Manual or automatic tool calibration
Retracing feature with retracing
Parametric Programming
Program Run & Z offset with Handwheel
Laser Height Scanning

Software

It presents the licensed LANTEK EXPERT program with Robjet machines. With the LANTEK cam program, you can easily nest drawing files in many formats, assign inputs and outputs automatically, and make them ready for cutting.