Saka Sarot
Advanced Treatment Reverse Osmosis Water Treatment Systems
It is used to remove soluble and insoluble particles of various sizes, suspended solids, heavy metals, turbidity and salinity in water with filtration systems and advanced treatment technologies.
Reverse Osmosis is a system used to separate possible chemical, physical and microbiological pollution elements from water, and it is a filtration method used to obtain water close to pure water by a physical process.
Reverse osmosis is the process of passing high pressure water over a semi-permeable membrane with the help of a pump. During this process, while water molecules and some inorganic molecules can pass through these pores, most of the organic and inorganic substances, salts, heavy metals, viruses and bacteria in the water cannot pass through these pores and are thrown out as concentrated water.
SAKA ARITIM engineers design SAROT systems by performing the necessary water inspections. The systems are designed by calculating 50-60% water efficiency with water permeation through the membranes with the help of a high pressure pump after the pre-filtration processes are done. Mechanical flow meters are placed on the water inlet and outlet lines, and membrane washings are performed with CIP systems according to the membrane efficiency ratio. Membrane pores are cleaned by chemical washing by our engineers and team in case of sudden clogging of the systems. Membrane life is extended by using membrane protectors in systems.
SYSTEM FEATURES
COMMERCIAL SYSTEMS
Factories, Hotels, Schools, Hospitals, Dormitories, etc. with an hourly water consumption of less than 5m³. uses are low-cost systems designed.
PVC membrane sleeves
TFC spiral wound membranes*
ST-37 Epoxy painted carbon steel chassis
PVC Housing Filter*
Pressure reducer in pump outlet and waste water line
Glycerin manometers
INDUSTRIAL SYSTEMS
Factories, Social Facilities, Rural Settlements, Neighborhoods, Towns, etc. with an hourly water consumption between 5 -20 m³. systems designed for use.
FRP membrane sheaths
TFC spiral wound membranes*
Chrome and Aluminum chassis
PVC Housing Filter*
U-PVC PN16 low and high pressure line
Automatic valve with electric actuation
Pressure regulating valves in pump outlet and waste water line
Low and high pressure switch
Leaving water and waste water flow meters
Glycerin manometers
PLC controlled panel
MASS SYSTEMS
Factories with hourly water consumption of 20 m³ and above, City Network Waters of Provincial/District Municipalities, etc. systems designed specifically for use.
FRP membrane sheaths
TFC spiral wound membranes*
ST-37 Epoxy painted carbon steel chassis
PVC Housing Filter*
PVC Cartridge Filter*
Steel cartridge Filter*
U-PVC PN16 low and high pressure line
Automatic valve with electric actuation
Pressure regulating valves in pump outlet and waste water line
Low and high pressure switch
Leaving water and waste water flow meters
Glycerin manometers
Leaving water conductivity indicator
Autoflush system
PLC controlled panel